SN74CBT6800CDGVRE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Weight | 60.894776mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | Bus Switch |
| Resistance | 12Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 10 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74CBT6800 |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Circuit | 10 x 1:1 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Nominal Supply Current | 3μA |
| Output Current | 64mA |
| Number of Bits | 10 |
| Propagation Delay | 240 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 6.2 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Nominal Input Voltage | 2V |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Power Supply Current-Max (ICC) | 0.003mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1.05mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBT6800CDGVRE4 Overview
In order to save board space, digital switch is located in the 24-TFSOP (0.173, 4.40mm Width).Tape & Reel (TR) represents its packaging.The mounting method digital switch ic uses is Surface Mount.A digital IC Bus Switch is used as the analog component of the multiplexers.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.Designers have greater flexibility when digital controlled switch operates at a 4V~5.5V supply voltage.With the 74CBT series, the multiplexers are suitable for a diverse range of applications.It is designed with 24 terminations as part of its basic configuration.The base part number is 74CBT6800, so you can find its logic switch related parts using that number.The multiplexer's system is powered by 5V voltage.This turn signal switch contains 24 component pins.As a result, conductors end at GULL WING.In this case, Single is employed as the supply type.There are 24 pins on it.It is mounted in the way of Surface Mount.There is a family of CBT/FST/QS/5C/B members.There are 10 bits signal multiplexer provides.It is recommended that the minimum supply voltage (Vsup) be kept at 4V to avoid some unnecessary failures.It is provided that 5V has a power supply in order to function normally.The digital switch ic is a part of an electronic system classified as Bus Driver/Transceivers.It consumes 3μA current of multiplexer ic without external influences.The performance of the multiplexers can be reliably maintained at a voltage of 5V.The signal switching is packaged by TR. The resistance is 2.The system operates with a resistance of 12Ohm.In order to provide greater switches' flexibility, 64mA is provided as the output current.
SN74CBT6800CDGVRE4 Features
Supplied in the 24-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT6800CDGVRE4 Applications
There are a lot of Texas Instruments SN74CBT6800CDGVRE4 Signal Switches / Multiplexers / Decoders applications.
- Data transfer
- War field flying robot with a night vision flying camera
- CNC machines
- Arithmetic Logic Units
- Make full adder
- PCIe
- Make half adder
- Telephone network
- Audio transmission
- Data distribution
