SN74CBT6800CDW
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Termination | SMD/SMT |
| Type | Bus Switch |
| Resistance | 12Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 10 |
| Supply Voltage | 5V |
| Base Part Number | 74CBT6800 |
| Pin Count | 24 |
| Max Output Current | 64mA |
| Operating Supply Voltage | 5V |
| Circuit | 10 x 1:1 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Nominal Supply Current | 3μA |
| Output Current | 64mA |
| Number of Bits | 10 |
| Propagation Delay | 240 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 6.2 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height Seated (Max) | 2.65mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
SN74CBT6800CDW Overview
Providing this information in the 24-SOIC (0.295, 7.50mm Width) enables digital switch board space to be saved.The package is in the form of Tube.Digital switch ic uses a Surface Mount mounting method.The analog IC in the multiplexers is identified as Bus Switch.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.Design engineers have more flexibility when digital controlled switch operates at 4V~5.5V voltage.These multiplexers are members of the 74CBT series, which provide extensive application potential.Among its basic features are 24 terminations.To find signal switch's related components, a base part number of 74CBT6800 may also be used.For multiplexer's system, a voltage of 5V is supplied.A component pin count of 24 is found on this turn signal switch.A conductor terminates at GULL WING.In this case, Single is employed as the supply type.A total of 24 pins are configured on this board.The multiplexer ic is mounted in the direction of Surface Mount.There is a family of CBT/FST/QS/5C/B members.Signal multiplexer provides 10 bits.To avoid unnecessary failures, keep the supply voltage at 4V (Vsup).mux switch's normal operation requires the power supply of 5V.The part belongs to the Bus Driver/Transceivers category of signal switches.Despite not interacting with external factors, it consumes 3μA current of multiplexer ic.The performance of the multiplexers can be reliably maintained at a voltage of 5V.2 ports are used for some other peripheral signal switchings to plug in.The system operates with a resistance of 12Ohm.There is an output current of 64mA that allows for greater switches' flexibility.
SN74CBT6800CDW Features
Supplied in the 24-SOIC (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT6800CDW Applications
There are a lot of Texas Instruments SN74CBT6800CDW Signal Switches / Multiplexers / Decoders applications.
- Automatic Monitoring systems
- Logic gates for other digital devices
- LVDS
- High-performance memory-decoding applications
- HD surveillance system
- Used to connect a single source to multiple destinations
- Enabling block of memory depending on address in memory chips
- Seven segment displays
- Solenoid cooling fan
- To select different task for memory in microprocessor memory systems
