SN74CBT6800CPW
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Weight | 89.499445mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Termination | SMD/SMT |
| Type | Bus Switch |
| Resistance | 12Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 10 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74CBT6800 |
| Pin Count | 24 |
| Max Output Current | 64mA |
| Operating Supply Voltage | 5V |
| Circuit | 10 x 1:1 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Nominal Supply Current | 3μA |
| Output Current | 64mA |
| Number of Bits | 10 |
| Propagation Delay | 240 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 6.2 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Length | 7.8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBT6800CPW Overview
Due to the lack of space on the board, digital switch is provided in the 24-TSSOP (0.173, 4.40mm Width).Tube represents its packaging.Digital switch ic adheres to a mounting method of Surface Mount.the multiplexers uses an analog IC Bus Switch.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.When digital controlled switch operates at 4V~5.5V, designers have superior flexibility.The multiplexers can be used for a wide range of applications since they are members of 74CBT series.As part of its basic configuration, 24 terminations are designed as a part of it.The base part number is 74CBT6800, which can also be used to find its logic switch related parts.For multiplexer's system, 5V voltage is supplied.Signal switch has 24 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.Single is used as its supply type.There are 24 pins on it.The mounting point is Surface Mount.The logic switch is a member of the CBT/FST/QS/5C/B family.As a result, signal multiplexer provides a total of 10 bits.Vsup should be kept at 4V to prevent some unnecessary failures.During mux switch's normal operation, 5V is provided with a power supply.Bus Driver/Transceivers is the classification for this the digital switch ic.There are no external influences on this multiplexer ic, so it consumes 3μA current.The performance of the multiplexers can be reliably maintained at a voltage of 5V.A resistance of 2 governs its operation.A resistance of 12Ohm is used to operate it.For higher switches' flexibility, the output current is set to 64mA.
SN74CBT6800CPW Features
Supplied in the 24-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT6800CPW Applications
There are a lot of Texas Instruments SN74CBT6800CPW Signal Switches / Multiplexers / Decoders applications.
- Automatic health monitoring systems
- Relay
- Paper plants
- War field flying robot with a night vision flying camera
- Enabling different rows of memory depending on address in memory chips
- Frequency multiplexing system
- Code conversion
- Transmission from the computer system of a satellite
- Encrypted communications system
- Analog to digital conversion
