banner_page

SN74CBT6800CPWR

24 Terminations4V~5.5V 24 Pin 74CBT6800 Signal switch74CBT Series 10 Functions


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74CBT6800CPWR
  • Package: 24-TSSOP (0.173, 4.40mm Width)
  • Datasheet: -
  • Stock: 598
  • Description: 24 Terminations4V~5.5V 24 Pin 74CBT6800 Signal switch74CBT Series 10 Functions(Kg)

Details

Tags

Parameters
Base Part Number 74CBT6800
Pin Count 24
Operating Supply Voltage 5V
Circuit 10 x 1:1
Power Supplies 5V
Supply Voltage-Min (Vsup) 4V
Number of Ports 2
Nominal Supply Current 3μA
Output Current 64mA
Number of Bits 10
Throw Configuration SPST
Propagation Delay 240 ps
Quiescent Current 3μA
Turn On Delay Time 6.2 ns
Family CBT/FST/QS/5C/B
Output Characteristics 3-STATE
Supply Type Single
Bandwidth 200MHz
Nominal Input Voltage 2V
Output Polarity TRUE
High Level Output Current -128mA
Low Level Output Current 128mA
Power Supply Current-Max (ICC) 0.003mA
Voltage Supply Source Single Supply
Independent Circuits 1
Count Direction BIDIRECTIONAL
Translation N/A
Height 1.2mm
Length 7.8mm
Width 4.4mm
Thickness 1mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 24-TSSOP (0.173, 4.40mm Width)
Number of Pins 24
Weight 89.499445mg
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Series 74CBT
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 24
ECCN Code EAR99
Type Bus Switch
Resistance 12Ohm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Bus Driver/Transceivers
Packing Method TR
Technology CMOS
Voltage - Supply 4V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 10
Supply Voltage 5V
Terminal Pitch 0.65mm

SN74CBT6800CPWR Overview


It is included in the 24-TSSOP (0.173, 4.40mm Width) in order to save board space.The package is packaged in accordance with Tape & Reel (TR).digital switch ic uses the method of Surface Mount for mounting.the multiplexers uses an analog IC Bus Switch.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.With a supply voltage of 4V~5.5V, designers have greater flexibility of digital controlled switch.The multiplexers from 74CBT series can be used for a wide range of applications.There are 24 terminations included in its basic configuration.As its base part number is 74CBT6800, logic switch can also be used to find its related parts.In multiplexer's system, 5V is the voltage supplied.There are 24 component pins in this turn signal switch.At the end of a conductor, it uses GULL WING as the point where the conductor ends.There is a type of supply Single that is employed in this case.The board has 24 pins configured.As you can see, it is mounted in the direction of Surface Mount.The logic switch object belongs to the family of CBT/FST/QS/5C/B.There are 10 bits in signal multiplexer.The minimal supply voltage (Vsup) should be kept at 4V to avoid some unnecessary failures.During mux switch's normal operation, 5V is provided with a power supply.In electronic terms, the digital switch ic is classified as part number Bus Driver/Transceivers.Without the influence of external factors, it consumes 3μA current of multiplexer ic.Providing a supply voltage of 5V can provide reliable performance of the multiplexers.According to TR, the switches is packaged.2 ports are used for some other peripheral signal switchings to plug in.It operates with a resistance of 12Ohm.For higher switches' flexibility, the output current is set to 64mA.

SN74CBT6800CPWR Features


Supplied in the 24-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V

SN74CBT6800CPWR Applications


There are a lot of Texas Instruments SN74CBT6800CPWR Signal Switches / Multiplexers / Decoders applications.

  • Data demultiplexing
  • Metal detectors
  • Enabling different functions units in microprocessor instruction decoding
  • Medium scale TV wall
  • Combinational circuit
  • RF-based home automation system
  • Logic circuits
  • To select different devices in microprocessor input
  • LVDS
  • Implementing boolean functions with multiple variables

Write a review

Note: HTML is not translated!
    Bad           Good