SN74CBT6845CDBQRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 20 |
| Weight | 125.786834mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| Type | Bus Switch |
| Resistance | 12Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Base Part Number | 74CBT6845 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Circuit | 8 x 1:1 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Nominal Supply Current | 3μA |
| Output Current | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 240 ps |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | 64mA |
| Low Level Output Current | 15mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74CBT6845CDBQRG4 Overview
Digital switch is provided in the 20-SSOP (0.154, 3.90mm Width) for the purpose of saving board space.The package is in the form of Tape & Reel (TR).Surface Mount is the mounting method digital switch ic uses.For the analog part of the multiplexers, an IC Bus Switch is used.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.The turn signal switch is designed for use with a 4.5V~5.5V supply voltage, which gives it a lot of flexibility.Since they are members of the 74CBT series, they can be used in a wide variety of applications.Its basic configuration includes terminations in the 20 range.The part number for 74CBT6845 can be used to find its logic switch related parts as well.The multiplexer's system is powered by 5V voltage.Signal switch has 20 component pins.As the end of conductors, it uses GULL WING.Single is employed as its supply type.This multiplexer ic is configured with 20 pins.It is mounted in the way of Surface Mount.The logic switch is a member of the family of CBT/FST/QS/5C/B.In this signal multiplexer, there are 8 bits provided.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 4V.A power supply is provided for mux switch's normal operation of 5V.In electronic terms, the digital switch ic is classified as part number Bus Driver/Transceivers.Supply voltages of 5V can provide reliable performance of the multiplexers.The resistance is 2.This signal switching operates at a resistance of 12Ohm.For greater switches' flexibility, 64mA provides the output current.
SN74CBT6845CDBQRG4 Features
Supplied in the 20-SSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT6845CDBQRG4 Applications
There are a lot of Texas Instruments SN74CBT6845CDBQRG4 Signal Switches / Multiplexers / Decoders applications.
- Control unit of Central Processing unit (CPU)
- CPU memory location identification
- Automatic health monitoring systems
- Solenoid cooling fan
- Enabling block of memory depending on address in memory chips
- LVDS
- Paper plants
- Data-routing applications
- GLAN
- Injectors
