SN74CBT6845CDW
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | SMD/SMT |
| Type | Bus Switch |
| Resistance | 12Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 8 |
| Supply Voltage | 5V |
| Base Part Number | 74CBT6845 |
| Pin Count | 20 |
| Max Output Current | 64mA |
| Operating Supply Voltage | 5V |
| Circuit | 8 x 1:1 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Nominal Supply Current | 3μA |
| Output Current | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 240 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 5.3 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height Seated (Max) | 2.65mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBT6845CDW Overview
For the purpose of saving board space, digital switch is included in the 20-SOIC (0.295, 7.50mm Width).It is packaged in the way of Tube.Digital switch ic uses a Surface Mount mounting method.A digital IC Bus Switch is used as the analog component of the multiplexers.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 4.5V~5.5V.provides digital controlled switch's digital controlled switch'sWith the 74CBT series, the multiplexers are suitable for a diverse range of applications.This configuration includes 20 terminations as part of its basic functionality.Its logic switch base part number is 74CBT6845 which can also be used to find its logic switch related parts.The multiplexer's system works with 5V voltage.This turn signal switch contains 20 component pins.As the end of conductors, it uses GULL WING.In this case, the supply type is Single.This multiplexer ic is configured with 20 pins.The mounting point is Surface Mount.The CBT/FST/QS/5C/B family includes the logic switch.In this signal multiplexer, there are 8 bits that are provided.Keeping Vsup at 4V will prevent some unwanted failures.The power supply of 5V is provided for mux switch's normal operation.In electronic terms, the digital switch ic is classified as part number Bus Driver/Transceivers.In the absence of external influences, it consumes 3μA current of multiplexer ic.Using a supply voltage of 5V can result in reliable performance of the multiplexers.The signal switching operates with a resistance of 2.12Ohm is the resistance at which it operates.For increased switches' flexibility, the output current of 64mA is provided.
SN74CBT6845CDW Features
Supplied in the 20-SOIC (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT6845CDW Applications
There are a lot of Texas Instruments SN74CBT6845CDW Signal Switches / Multiplexers / Decoders applications.
- Relay
- Analog to digital conversion
- Memory system of computers
- Make half adder
- Audio transmission
- Time division multiplexing system
- Paper plants
- Computer memory
- Speed control of medern motors
- Metal detectors
