Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-SOIC (0.295, 7.50mm Width) |
Number of Pins |
20 |
Weight |
500.709277mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74CBT |
JESD-609 Code |
e4 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
Type |
Bus Switch |
Resistance |
12Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Bus Driver/Transceivers |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
8 |
Supply Voltage |
5V |
Base Part Number |
74CBT6845 |
Pin Count |
20 |
Operating Supply Voltage |
5V |
Circuit |
8 x 1:1 |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4V |
Number of Ports |
2 |
Nominal Supply Current |
3μA |
Output Current |
64mA |
Number of Bits |
8 |
Propagation Delay |
240 ps |
Family |
CBT/FST/QS/5C/B |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Output Polarity |
TRUE |
High Level Output Current |
64mA |
Low Level Output Current |
15mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
1 |
Height Seated (Max) |
2.65mm |
Width |
7.5mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
SN74CBT6845CDWRG4 Overview
As a means of saving space, digital switch is provided in the 20-SOIC (0.295, 7.50mm Width).As a result, it is packaged in a way that is referred to as Tape & Reel (TR).The mounting method digital switch ic uses is Surface Mount.the multiplexers uses an analog IC Bus Switch.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 4.5V~5.5V.provides digital controlled switch's digital controlled switch'sMultiplexers of the 74CBT series can be used in a wide range of applications.As parts of its basic configuration, 20 terminations are desgined.The base part number is 74CBT6845, which can also be used to find its logic switch related parts.The multiplexer's system works with 5V voltage.Currently, this turn signal switch has a total of 20 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.Its supply type is Single, which is used as the source of power.Currently, it is configured with 20 pins.Surface Mount is the way it is mounted.The logic switch is a member of the family of CBT/FST/QS/5C/B.The multiplexer ic provides 8 bits.The minimal supply voltage (Vsup) should be kept at 4V to avoid some unnecessary failures.mux switch's normal operation requires the power supply of 5V.The digital switch ic is an electronic part classified into Bus Driver/Transceivers.The performance of the multiplexers can be reliably maintained at a voltage of 5V.As far as the resistance is concerned, it operates with 2.The system operates with a resistance of 12Ohm.In order to provide greater switches' flexibility, 64mA is provided as the output current.
SN74CBT6845CDWRG4 Features
Supplied in the 20-SOIC (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT6845CDWRG4 Applications
There are a lot of Texas Instruments SN74CBT6845CDWRG4 Signal Switches / Multiplexers / Decoders applications.
- Data distribution
- Speed control of medern motors
- Steel plants
- Microprocessor input/output systems
- Enabling different rows of memory depending on address in memory chips
- To select different task for memory in microprocessor memory systems
- Code converters
- Idle motor
- D/A converters
- Automatic Monitoring systems