SN74CBT6845CPW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74CBT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | Bus Switch |
| Resistance | 12Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 8 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74CBT6845 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Circuit | 8 x 1:1 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Nominal Supply Current | 3μA |
| Output Current | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 240 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 5.3 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBT6845CPW Overview
In order to save board space, digital switch is located in the 20-TSSOP (0.173, 4.40mm Width).The package is packaged in the manner of Tube.The mounting method digital switch ic uses is Surface Mount.In the multiplexers, the analog IC is indicated by Bus Switch.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.When digital controlled switch operates at 4.5V~5.5V, designers are provided with a greater degree of flexibility.Several applications are possible for 74CBT series multiplexers.Among its basic features are 20 terminations.There is a base part number 74CBT6845 that can be used to locate signal switch's related components as well.The multiplexer's system is powered by 5V voltage.A component pin count of 20 can be found on this turn signal switch.GULL WING is used as the point at which the conductors come to an end as part of this formula.This supply type employs Single.Currently, it is configured with 20 pins.The mount is in Surface Mount.The logic switch is a member of the CBT/FST/QS/5C/B family.The multiplexer ic provides 8 bits.Keeping Vsup at 4V will prevent some unwanted failures.For mux switch's normal operation, power supply 5V is provided.This is a signal switch that is categorized as Bus Driver/Transceivers.In the absence of external influences, it consumes 3μA current of multiplexer ic.With a supply voltage of 5V, reliable performance of the multiplexers can be achieved.This signal switching operates at a resistance of 2.12Ohm is the resistance at which it operates.For greater switches' flexibility, the output current of 64mA is provided.
SN74CBT6845CPW Features
Supplied in the 20-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBT6845CPW Applications
There are a lot of Texas Instruments SN74CBT6845CPW Signal Switches / Multiplexers / Decoders applications.
- Relay
- Code conversion
- High-performance memory-decoding applications
- Frequency multiplexing system
- Robotic vehicles
- Electronically controlled engine system
- Data communication
- PCIe
- A/D converters
- Injectors
