Parameters |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
48-TFSOP (0.173, 4.40mm Width) |
Number of Pins |
48 |
Weight |
123.490523mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Cut Tape (CT) |
Series |
74CBTD |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Discontinued |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
48 |
ECCN Code |
EAR99 |
Type |
Bus Switch |
Resistance |
7Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Bus Driver/Transceivers |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.4mm |
Base Part Number |
74CBTD16210 |
Pin Count |
48 |
Operating Supply Voltage |
5V |
Circuit |
10 x 1:1 |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Nominal Supply Current |
1.5mA |
Output Current |
64mA |
Number of Bits |
20 |
Throw Configuration |
SPST |
Propagation Delay |
9.8 ns |
Quiescent Current |
1.5mA |
Turn On Delay Time |
9.8 ns |
Family |
CBT/FST/QS/5C/B |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
20MHz |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
2 |
Count Direction |
BIDIRECTIONAL |
Translation |
N/A |
Height |
1.2mm |
Length |
9.7mm |
Width |
4.4mm |
Thickness |
1.05mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74CBTD16210DGVR Overview
It is included in the 48-TFSOP (0.173, 4.40mm Width) in order to save board space.Cut Tape (CT) represents its packaging.digital switch ic uses the method of Surface Mount for mounting.The analog IC in the multiplexers is identified as Bus Switch.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.When digital controlled switch operates at 4.5V~5.5V, designers have superior flexibility.Multiplexers of the 74CBTD series can be used in a wide range of applications.Among its basic features are 48 terminations.The part number for 74CBTD16210 can be used to find its logic switch related parts as well.The multiplexer's system is powered by 5V volts.This turn signal switch has 48 component pins.It employs GULL WING as the point at which conductors come to an end.The supply type of this multiplexer ic is Single.The board is configured with 48 pins.It is positioned in the direction of Surface Mount.The logic switch is a member of the family of CBT/FST/QS/5C/B.As a result, signal multiplexer provides 20 bits.A power supply is provided for mux switch's normal operation of 5V.The part belongs to the Bus Driver/Transceivers category of signal switches.Not being affected by the external factors, consumes 1.5mA current of multiplexer ic.Supply voltages of 5V can provide reliable performance of the multiplexers.The switches package is packaged in accordance with the TR method.The signal switching operates with a resistance of 2.As far as the resistance is concerned, it operates with 7Ohm.For higher switches' flexibility, 64mA is provided as an output current.
SN74CBTD16210DGVR Features
Supplied in the 48-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBTD16210DGVR Applications
There are a lot of Texas Instruments SN74CBTD16210DGVR Signal Switches / Multiplexers / Decoders applications.
- Electronically controlled engine system
- Memory system of computers
- Automatic Monitoring systems
- Implementing boolean functions with multiple variables
- Home automation system
- Relay
- Enabling block of memory depending on address in memory chips
- Idle motor
- Arithmetic Logic Units
- Recording transmission