SN74CBTD16210DLG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 48 |
| Weight | 600.301152mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| Resistance | 7Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Pin Count | 48 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 1.5mA |
| Current - Output | 64mA |
| Number of Bits | 20 |
| Propagation Delay | 250 ps |
| Quiescent Current | 1.5mA |
| Turn On Delay Time | 9.8 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 20MHz |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Control Type | ENABLE LOW |
| Independent Circuits | 2 |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 2.59mm |
| Length | 15.88mm |
| Width | 7.49mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74CBTD16210DLG4 Overview
Digital switch is provided in the SSOP for the purpose of saving board space.There is a design for terminating 48 as part of its basic configuration.The turn signal switch is supplied with a voltage of 5V volts.This turn signal switch has 48 component pins.It is the end of conductors that is represented by GULL WING.Its supply type is Single, which is used as the source of power.It is configured with 48 pins.The multiplexer ic is mounted in the direction of Surface Mount.In the CBT/FST/QS/5C/B family, the logic switch is included.In the signal multiplexer, there are 20 bits available.The power supply of 5V is provided for mux switch's normal operation.Part number Bus Driver/Transceivers indicates that the digital switch ic is an electronic part.Without the influence of external factors, it consumes 1.5mA current of multiplexer ic.Providing a supply voltage of 5V can provide reliable performance of the multiplexers.2 is the resistance at which it operates.It operates with a resistance of 7Ohm.Signal switchs at temperatures up to 85°C are acceptable.Ideally, the temperature of the multiplexer should not exceed -40°C.The device is specified to operate at the maximum supply voltage of 5.5V in accordance with its applicable specification.Typical device specifications specify a voltage supply of 4.5V for the digital swith.BUS DRIVER is the logic integrated circuit used in the digitalswitch.
SN74CBTD16210DLG4 Features
Supplied in the SSOP package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
BUS DRIVER as the logic IC
SN74CBTD16210DLG4 Applications
There are a lot of Texas Instruments SN74CBTD16210DLG4 Signal Switches / Multiplexers / Decoders applications.
- Data demultiplexing
- Data-routing applications
- RF-based home automation system
- GLAN
- Electronically controlled engine system
- Signal router
- Medium scale TV wall
- Combinational circuit
- Logic gates for other digital devices
- Logic circuits
