SN74CBTD16210DLR

48 Terminations4.5V~5.5V 48 Pin 74CBTD16210 Signal switch74CBTD Series 2 Functions

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74CBTD16210DLR
Package: 48-BSSOP (0.295, 7.50mm Width)
Datasheet: -
Stock: 471
Description: 48 Terminations4.5V~5.5V 48 Pin 74CBTD16210 Signal switch74CBTD Series 2 Functions(Kg)

Details

Tags

Parameters
Load Capacitance	50pF
Number of Ports	2
Nominal Supply Current	1.5mA
Output Current	64mA
Number of Bits	20
Throw Configuration	SPST
Propagation Delay	9.8 ns
Quiescent Current	1.5mA
Turn On Delay Time	9.8 ns
Family	CBT/FST/QS/5C/B
Output Characteristics	3-STATE
Supply Type	Single
Bandwidth	20MHz
High Level Output Current	-128mA
Low Level Output Current	128mA
Voltage Supply Source	Single Supply
Independent Circuits	2
Count Direction	BIDIRECTIONAL
Translation	N/A
Height	2.79mm
Length	15.88mm
Width	7.49mm
Thickness	2.59mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 week ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	48-BSSOP (0.295, 7.50mm Width)
Number of Pins	48
Weight	600.301152mg
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
Series	74CBTD
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	48
ECCN Code	EAR99
Type	Bus Switch
Resistance	7Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Bus Driver/Transceivers
Packing Method	TR
Technology	CMOS
Voltage - Supply	4.5V~5.5V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Terminal Pitch	0.635mm
Base Part Number	74CBTD16210
Pin Count	48
Operating Supply Voltage	5V
Circuit	10 x 1:1
Polarity	Non-Inverting
Power Supplies	5V

SN74CBTD16210DLR Overview

Providing this information in the 48-BSSOP (0.295, 7.50mm Width) enables digital switch board space to be saved.The package is packaged in the manner of Tape & Reel (TR).digital switch ic uses the method of Surface Mount for mounting.the multiplexers uses IC Bus Switch as the analog IC.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.When digital controlled switch operates at 4.5V~5.5V, designers have superior flexibility.Since they are members of the 74CBTD series, they can be used in a wide variety of applications.As parts of its basic configuration, 48 terminations are desgined.Its logic switch base part number is 74CBTD16210 which can also be used to find its logic switch related parts.The multiplexer's system is supplied with a voltage of 5V.A component pin count of 48 is found on this turn signal switch.It employs GULL WING as the point at which conductors come to an end.The supply type of this multiplexer ic is Single.It is configured with 48 pins.It is positioned in the direction of Surface Mount.The logic switch is included into the family of CBT/FST/QS/5C/B.Signal multiplexer consists of 20 bits.mux switch's normal operation requires the power supply of 5V.I would classify the digital switch ic as an electronic part belonging to the Bus Driver/Transceivers category.In the absence of external influences, it consumes 1.5mA current of multiplexer ic.Reliable performance of the multiplexers can be achieved when a supply voltage of 5V is provided.TR is used to package the switches.The resistance of the signal switching is 2.This signal switching operates at a resistance of 7Ohm.In order to provide greater switches' flexibility, 64mA is provided as the output current.