SN74CBTD16211DGGR

56 Terminations4.5V~5.5V 56 Pin 74CBTD16211 Signal switch74CBTD Series 2 Functions

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74CBTD16211DGGR
Package: 56-TFSOP (0.240, 6.10mm Width)
Datasheet: -
Stock: 406
Description: 56 Terminations4.5V~5.5V 56 Pin 74CBTD16211 Signal switch74CBTD Series 2 Functions(Kg)

Details

Tags

Parameters
High Level Output Current	-128mA
Low Level Output Current	128mA
Voltage Supply Source	Single Supply
Independent Circuits	2
Count Direction	BIDIRECTIONAL
Translation	N/A
Height	1.2mm
Length	14mm
Width	6.1mm
Thickness	1.15mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	56-TFSOP (0.240, 6.10mm Width)
Number of Pins	56
Weight	252.792698mg
Operating Temperature	-40°C~85°C
Packaging	Cut Tape (CT)
Series	74CBTD
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	56
ECCN Code	EAR99
Type	Bus Switch
Resistance	7Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Bus Driver/Transceivers
Packing Method	TR
Technology	CMOS
Voltage - Supply	4.5V~5.5V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Terminal Pitch	0.5mm
Base Part Number	74CBTD16211
Pin Count	56
Operating Supply Voltage	5V
Circuit	12 x 1:1
Polarity	Non-Inverting
Power Supplies	5V
Load Capacitance	50pF
Number of Ports	2
Nominal Supply Current	1.5mA
Output Current	64mA
Number of Bits	24
Throw Configuration	SPST
Propagation Delay	250 ps
Quiescent Current	1.5mA
Turn On Delay Time	9.8 ns
Family	CBT/FST/QS/5C/B
Output Characteristics	3-STATE
Supply Type	Single
Bandwidth	20MHz

SN74CBTD16211DGGR Overview

It is included in the 56-TFSOP (0.240, 6.10mm Width) in order to save board space.As a result, it is packaged in a way that is referred to as Cut Tape (CT).As far as mounting is concerned, digital switch ic uses Surface Mount.the multiplexers uses IC Bus Switch as the analog IC.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.With a supply voltage of 4.5V~5.5V, designers have greater flexibility of digital controlled switch.Multiplexers of the 74CBTD series can be used in a wide range of applications.There is a design for terminating 56 as part of its basic configuration.You can also find related parts by using its logic switch base part number of 74CBTD16211.The turn signal switch is supplied with a voltage of 5V volts.This turn signal switch contains 56 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.In this case, Single is employed as the supply type.Currently, it is configured with a 56 pin configuration.The mounting point is Surface Mount.There is a family of CBT/FST/QS/5C/B members.As a result, signal multiplexer provides 24 bits.For mux switch's normal operation, there is a power supply provided at 5V.Part number Bus Driver/Transceivers indicates that the digital switch ic is an electronic part.There are no external influences on this multiplexer ic, so it consumes 1.5mA current.When a supply voltage of 5V is used, reliable performance of the multiplexers can be achieved.The switches package is packaged in a way which is consistent with TR.This signal switching operates at a resistance of 2.This signal switching operates at a resistance of 7Ohm.In order to provide greater switches' flexibility, 64mA is provided as the output current.