SN74CBTD1G125DBVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 11.198062mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74CBTD |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 35Ohm |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74CBTD1G125 |
| Pin Count | 5 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 1 x 1:1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Ports | 2 |
| Nominal Supply Current | 1.5mA |
| Number of Bits | 1 |
| Throw Configuration | SPST |
| Propagation Delay | 250 ps |
| Quiescent Current | 1.5mA |
| Turn On Delay Time | 5.9 ns |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBTD1G125DBVR Overview
Due to the fact that it is provided in the SC-74A, SOT-753, digital switch allows the board to be compacted.It is packaged in the way of Cut Tape (CT).In terms of mounting, digital switch ic uses the method of Surface Mount.A digital IC Bus Switch is used as the analog component of the multiplexers.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.When operated with a 4.5V~5.5V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.The multiplexers from 74CBTD series can be used for a wide range of applications.The basic configuration includes 5 terminations.To find signal switch's related components, a base part number of 74CBTD1G125 may also be used.The multiplexer's system is supplied with a voltage of 5V.This turn signal switch contains 5 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.This supply type employs Single.With 5 pins, it is configured.Surface Mount is the way it is mounted.As a result, signal multiplexer provides a total of 1 bits.For mux switch's normal operation, power supply 5V is provided.The part belongs to the Bus Driver/Transceivers category of signal switches.In the absence of external influences, it consumes 1.5mA current of multiplexer ic.With a supply voltage of 5V, reliable performance of the multiplexers can be achieved.The switches package is packaged in accordance with TR.With a resistance of 0, it operates.35Ohm is the resistance at which it operates.This mux switch configuration has 1 elements.
SN74CBTD1G125DBVR Features
Supplied in the SC-74A, SOT-753 package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBTD1G125DBVR Applications
There are a lot of Texas Instruments SN74CBTD1G125DBVR Signal Switches / Multiplexers / Decoders applications.
- Signal router
- Telephone network
- Make full adder
- Steel plants
- Relay
- Transmission from the computer system of a satellite
- Data communication
- Analog to digital conversion
- Data transfer
- High-performance memory systems
