SN74CBTD1G125DCKR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Weight | 2.494758mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBTD |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 35Ohm |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74CBTD1G125 |
| Pin Count | 5 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 1 x 1:1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Ports | 2 |
| Nominal Supply Current | 1.5mA |
| Number of Bits | 1 |
| Throw Configuration | SPST |
| Propagation Delay | 5.9 ns |
| Quiescent Current | 1.5mA |
| Turn On Delay Time | 5.9 ns |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBTD1G125DCKR Overview
Due to the lack of space on the board, digital switch is provided in the 5-TSSOP, SC-70-5, SOT-353.It is packaged according to the Tape & Reel (TR) method.digital switch ic uses the method of Surface Mount for mounting.In the multiplexers, the analog IC is indicated by Bus Switch.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.When digital controlled switch operates at 4.5V~5.5V, designers are provided with a greater degree of flexibility.The multiplexers can be used for a wide range of applications since they are members of 74CBTD series.As part of its basic configuration, 5 terminations are designed as a part of it.The base part number is 74CBTD1G125, which is also useful when looking up signal switch's related components.For multiplexer's system, a voltage of 5V is supplied.This turn signal switch contains 5 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.Single is used as its supply type.Currently, it is configured with a 5 pin configuration.This unit is mounted in the way of Surface Mount.In the signal multiplexer, there are 1 bits available.The power supply of 5V is provided for mux switch's normal operation.Bus Driver/Transceivers is a category for the digital switch ics.Without the influence of external factors, it consumes 1.5mA current of multiplexer ic.Using a supply voltage of 5V can result in reliable performance of the multiplexers.The switches package is packaged in a way which is consistent with TR.2 ports are used for some other peripheral signal switchings to plug in.The resistance of the signal switching is 35Ohm.This mux switch configuration has 1 elements.
SN74CBTD1G125DCKR Features
Supplied in the 5-TSSOP, SC-70-5, SOT-353 package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBTD1G125DCKR Applications
There are a lot of Texas Instruments SN74CBTD1G125DCKR Signal Switches / Multiplexers / Decoders applications.
- Video transmission
- Automatic Monitoring systems
- Data communication
- To select different devices in microprocessor output
- Night vision cameras
- VGA
- Recording transmission
- Logic circuits
- Memory system of computers
- Small scale TV wall
