SN74CBTD1G125DCKT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Weight | 2.494758mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBTD |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| Type | Bus Switch |
| Resistance | 35Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74CBTD1G125 |
| Pin Count | 5 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Circuit | 1 x 1:1 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Number of Ports | 2 |
| Nominal Supply Current | 1.5mA |
| Output Current | 64mA |
| Number of Bits | 1 |
| Propagation Delay | 250 ps |
| Quiescent Current | 1.5mA |
| Turn On Delay Time | 5.9 ns |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBTD1G125DCKT Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 5-TSSOP, SC-70-5, SOT-353.Tape & Reel (TR) is the packaging method.Surface Mount is the mounting method digital switch ic uses.The analog IC in the multiplexers is identified as Bus Switch.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.A supply voltage of 4.5V~5.5V provides digital controlled switch's superior flexibility for designers.In addition to being a member of the 74CBTD series, these multiplexers have a wide range of applications.As part of its basic configuration, 5 terminations are designed as a part of it.The base part number is 74CBTD1G125, which is also useful when looking up signal switch's related components.The multiplexer is supplied with 5V voltage.A component pin count of 5 is found on this turn signal switch.GULL WING represents the end of conductors.In this case, the supply type is Single.A total of 5 pins are configured on this board.The mounting point is Surface Mount.In the signal multiplexer, there are 1 bits available.mux switch's normal operation requires the power supply of 5V.The part belongs to the Bus Driver/Transceivers category of signal switches.In the absence of external influences, it consumes 1.5mA current of multiplexer ic.The performance of the multiplexers can be reliably maintained at a voltage of 5V.TR is used to package the switches.With a resistance of 0, it operates.It operates with a resistance of 35Ohm.The turn signal switch's circuit consists of 1 channels that are being used for transmission in the circuit.In order to provide greater switches' flexibility, 64mA is provided as the output current.
SN74CBTD1G125DCKT Features
Supplied in the 5-TSSOP, SC-70-5, SOT-353 package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBTD1G125DCKT Applications
There are a lot of Texas Instruments SN74CBTD1G125DCKT Signal Switches / Multiplexers / Decoders applications.
- Decimal decoder
- Night vision cameras
- Enabling different functions units in microprocessor instruction decoding
- Data-routing applications
- Injectors
- Microprocessor memory systems
- Image transmission
- Speed control of medern motors
- Electronically controlled engine system
- GLAN
