SN74CBTD1G384DBVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 11.198062mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74CBTD |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 35Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74CBTD1G384 |
| Pin Count | 5 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 1 x 1:1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Ports | 2 |
| Nominal Supply Current | 1.5mA |
| Number of Bits | 1 |
| Throw Configuration | SPST |
| Propagation Delay | 250 ps |
| Quiescent Current | 1.5mA |
| Turn On Delay Time | 5.9 ns |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBTD1G384DBVR Overview
The reason it is provided is that the board space can be saved by placing digital switch in the SC-74A, SOT-753.Cut Tape (CT) is the packaging method.The method digital switch ic adopts for mounting is Surface Mount.A digital IC Bus Switch is used as the analog component of the multiplexers.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.The turn signal switch is designed for use with a 4.5V~5.5V supply voltage, which gives it a lot of flexibility.Multiplexers of the 74CBTD series can be used in a wide range of applications.As parts of its basic configuration, 5 terminations are desgined.The base part number is 74CBTD1G384, so you can find its logic switch related parts using that number.For multiplexer's system, a voltage of 5V is supplied.A component pin count of 5 can be found on this turn signal switch.GULL WING represents the end of conductors.There is a supply type of Single employed as part of this supply.The board is configured with 5 pins.The multiplexer ic is mounted in the direction of Surface Mount.There are 1 bits in signal multiplexer.During mux switch's normal operation, 5V is provided with a power supply.The part belongs to the Bus Driver/Transceivers category of signal switches.No external influence consumes 1.5mA current of multiplexer ic.With a supply voltage of 5V, reliable performance of the multiplexers can be achieved.The switches package is packaged in a way which is consistent with TR.The system operates with a resistance of 2.In terms of resistance, it has a value of 35Ohm.The mux switch configuration contains 1 elements.
SN74CBTD1G384DBVR Features
Supplied in the SC-74A, SOT-753 package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBTD1G384DBVR Applications
There are a lot of Texas Instruments SN74CBTD1G384DBVR Signal Switches / Multiplexers / Decoders applications.
- Control unit of Central Processing unit (CPU)
- Audio transmission
- High-performance memory-decoding applications
- Electronics industry
- War field flying robot with a night vision flying camera
- Time division multiplexing system
- Injectors
- Robotic vehicles
- Code converters
- CPU memory location identification
