SN74CBTD1G384DCKR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Weight | 2.494758mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74CBTD |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 35Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74CBTD1G384 |
| Pin Count | 5 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 1 x 1:1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Ports | 2 |
| Nominal Supply Current | 1.5mA |
| Number of Bits | 1 |
| Throw Configuration | SPST |
| Propagation Delay | 5.9 ns |
| Quiescent Current | 1.5mA |
| Turn On Delay Time | 5.9 ns |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBTD1G384DCKR Overview
In order to conserve board space, digital switch is included in the 5-TSSOP, SC-70-5, SOT-353.As a result, it is packaged in the way of Cut Tape (CT).The method digital switch ic adopts for mounting is Surface Mount.The analog IC in the multiplexers is identified as Bus Switch.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.When operated with a 4.5V~5.5V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.Multiplexers in the 74CBTD series are suitable for a wide range of applications.Among its basic features are 5 terminations.Its logic switch base part number is 74CBTD1G384 which can also be used to find its logic switch related parts.The multiplexer's system is powered by 5V voltage.This turn signal switch contains 5 component pins.Conductors terminate at GULL WING in this design.In this case, Single is employed as the supply type.Currently, it is configured with 5 pins.The multiplexer ic is mounted in the direction of Surface Mount.In this signal multiplexer, there are 1 bits that are provided.Normally, 5V is powered by a battery.I would classify the digital switch ic as an electronic part belonging to the Bus Driver/Transceivers category.It consumes 1.5mA current of multiplexer ic since it is not affected by external factors.Using a supply voltage of 5V can result in reliable performance of the multiplexers.TR is used to package the switches.This signal switching operates at a resistance of 2.The resistance of the signal switching is 35Ohm.The configuration of the mux switch contains 1 elements.
SN74CBTD1G384DCKR Features
Supplied in the 5-TSSOP, SC-70-5, SOT-353 package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBTD1G384DCKR Applications
There are a lot of Texas Instruments SN74CBTD1G384DCKR Signal Switches / Multiplexers / Decoders applications.
- Data demultiplexing
- Seven segment displays
- Data distribution
- D/A converters
- Computer memory
- HDMI applications
- Data communication
- Time division multiplexing system
- GLAN
- Automatic health monitoring systems
