SN74CBTD1G384DCKT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Weight | 2.494758mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBTD |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| Type | Bus Switch |
| Resistance | 35Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74CBTD1G384 |
| Pin Count | 5 |
| Operating Supply Voltage | 5V |
| Circuit | 1 x 1:1 |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Number of Ports | 2 |
| Nominal Supply Current | 1.5mA |
| Output Current | 64mA |
| Number of Bits | 1 |
| Propagation Delay | 250 ps |
| Quiescent Current | 1.5mA |
| Turn On Delay Time | 5.9 ns |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBTD1G384DCKT Overview
Due to the lack of space on the board, digital switch is provided in the 5-TSSOP, SC-70-5, SOT-353.Tape & Reel (TR) is the packaging method.digital switch ic uses the method of Surface Mount for mounting.A digital IC Bus Switch is used as the analog component of the multiplexers.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.When digital controlled switch operates at 4.5V~5.5V, designers are provided with a greater degree of flexibility.Several applications are possible for 74CBTD series multiplexers.As parts of its basic configuration, 5 terminations are desgined.The base part number is 74CBTD1G384, which can also be used to find its logic switch related parts.The multiplexer's system works with 5V voltage.This turn signal switch has a total of 5 component pins.GULL WING represents the end of conductors.Its supply type is Single, which is used as the source of power.There are 5 pins on it.Multiplexer ics are mounted in the direction of Surface Mount.Signal multiplexer consists of 1 bits.There is a power supply provided for the mux switch's normal operation of 5V.The part belongs to the Bus Driver/Transceivers category of signal switches.In the absence of external influences, it consumes 1.5mA current of multiplexer ic.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 5V.The signal switching is packaged by TR. A resistance of 2 governs its operation.With a resistance of 35Ohm, it operates.There are a total of 1 channels used for transmitting data in the turn signal switch's circuit.For higher switches' flexibility, 64mA is provided as an output current.
SN74CBTD1G384DCKT Features
Supplied in the 5-TSSOP, SC-70-5, SOT-353 package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBTD1G384DCKT Applications
There are a lot of Texas Instruments SN74CBTD1G384DCKT Signal Switches / Multiplexers / Decoders applications.
- Logic gates for other digital devices
- Time division multiplexing system
- To select different task for memory in microprocessor memory systems
- Memory chips
- Communication system
- Solenoid cooling fan
- Relay
- Memory system of computers
- Make half adder
- CPU memory location identification
