SN74CBTD3305CPWRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBTD |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | Bus Switch |
| Resistance | 20Ohm |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74CBTD3305 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Circuit | 1 x 1:1 |
| Power Supplies | 5V |
| Number of Ports | 2 |
| Nominal Supply Current | 1.5mA |
| Output Current | 64mA |
| Number of Bits | 1 |
| Propagation Delay | 150 ps |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 20MHz |
| Output Polarity | TRUE |
| High Level Output Current | 64mA |
| Low Level Output Current | 15mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Length | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74CBTD3305CPWRG4 Overview
It is included in the 8-TSSOP (0.173, 4.40mm Width) in order to save board space.The package is packaged in the manner of Tape & Reel (TR).In terms of mounting, digital switch ic uses the Surface Mount method .the multiplexers uses IC Bus Switch as the analog IC.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.Design engineers have more flexibility when digital controlled switch operates at 4.5V~5.5V voltage.Multiplexers of the 74CBTD series can be used in a wide range of applications.The basic configuration includes 8 terminations.To find signal switch's related components, a base part number of 74CBTD3305 may also be used.For multiplexer's system, a voltage of 5V is supplied.A component pin count of 8 is found on this turn signal switch.As a result, GULL WING represents the end of the conductors.In this case, the supply type is Single.Currently, it is configured with 8 pins.Multiplexer ics are mounted in the direction of Surface Mount.Among the family of CBT/FST/QS/5C/B the logic switch is a member.In the signal multiplexer, there are 1 bits available.In order for 5V to operate normally, a power supply is provided.In electronic terms, the digital switch ic is classified as Bus Driver/Transceivers.Providing a supply voltage of 5V can provide reliable performance of the multiplexers.The resistance of the signal switching is 2.It operates with a resistance of 20Ohm.For higher switches' flexibility, 64mA is provided as an output current.
SN74CBTD3305CPWRG4 Features
Supplied in the 8-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBTD3305CPWRG4 Applications
There are a lot of Texas Instruments SN74CBTD3305CPWRG4 Signal Switches / Multiplexers / Decoders applications.
- Robotic vehicles
- To select different devices in microprocessor input
- Encrypted communications system
- Make full adder
- Microprocessor input/output systems
- RF-based home automation system
- Telephone network
- Used to connect a single source to multiple destinations
- To select different task for memory in microprocessor memory systems
- Home automation system
