SN74CBTD3306CDRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| Resistance | 20Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Ports | 2 |
| Nominal Supply Current | 1.5mA |
| Current - Output | 64mA |
| Number of Bits | 2 |
| Propagation Delay | 150 ps |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 20MHz |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74CBTD3306CDRE4 Overview
The reason it is provided is that the board space can be saved by placing digital switch in the SOIC.Tape & Reel (TR) represents its packaging.The basic configuration includes 8 terminations.The multiplexer's system is powered by 5V voltage.This turn signal switch consists of 8 component pins.A conductor terminates at GULL WING.As a type of supply, Single is employed.There are 8 pins on it.This unit is mounted in the way of Surface Mount.The logic switch is a member of the family of CBT/FST/QS/5C/B.In the signal multiplexer, there are 2 bits available.For mux switch's normal operation, there is a power supply provided at 5V.This is an the digital switch ic that is classified as Bus Driver/Transceivers.Supply voltages of 5V can provide reliable performance of the multiplexers.The signal switching operates with a resistance of 2.It operates with a resistance of 20Ohm.Transmission is carried out over 2 channels in the turn signal switch's circuit.Signal switch operation at 85°C temperature is acceptable.Temperatures of the multiplexer should be kept at -40°C.The device is specified to operate at a maximum supply voltage of 5.5V in accordance with the applicable device specification.The digital swith is specified to operate at the minimum supply voltage of 4.5V in compliance with the applicable device specification.In order to implement its logic, it makes use of IC BUS DRIVER.
SN74CBTD3306CDRE4 Features
Supplied in the SOIC package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
BUS DRIVER as the logic IC
SN74CBTD3306CDRE4 Applications
There are a lot of Texas Instruments SN74CBTD3306CDRE4 Signal Switches / Multiplexers / Decoders applications.
- Data communication
- Analog, digital or video signal switching
- High-performance memory systems
- D/A converters
- Encrypted communications system
- A/D converters
- Signal router
- Speed synchronization of multiple motors in industries
- HDMI applications
- Data demultiplexing
