SN74CBTD3306CPW

8 Terminations4.5V~5.5V 8 Pin 74CBTD3306 Signal switch74CBTD Series 2 Functions

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74CBTD3306CPW
Package: 8-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 972
Description: 8 Terminations4.5V~5.5V 8 Pin 74CBTD3306 Signal switch74CBTD Series 2 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 2 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP (0.173, 4.40mm Width)
Number of Pins	8
Weight	39.008944mg
Operating Temperature	-40°C~85°C
Packaging	Tube
Series	74CBTD
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Type	Bus Switch
Resistance	20Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Bus Driver/Transceivers
Technology	CMOS
Voltage - Supply	4.5V~5.5V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Terminal Pitch	0.65mm
Base Part Number	74CBTD3306
Pin Count	8
Operating Supply Voltage	5V
Circuit	1 x 1:1
Power Supplies	5V
Number of Channels	2
Number of Ports	2
Nominal Supply Current	1.5mA
Output Current	64mA
Number of Bits	1
Propagation Delay	150 ps
Quiescent Current	1.5mA
Turn On Delay Time	4.7 ns
Family	CBT/FST/QS/5C/B
Output Characteristics	3-STATE
Supply Type	Single
Bandwidth	20MHz
Address Bus Width	2b
Output Polarity	TRUE
Prop. Delay@Nom-Sup	0.15 ns
High Level Output Current	-128mA
Low Level Output Current	128mA
Voltage Supply Source	Single Supply
Count Direction	BIDIRECTIONAL
Translation	N/A
Height	1.2mm
Length	3mm
Width	4.4mm
Thickness	1mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SN74CBTD3306CPW Overview

Providing this information in the 8-TSSOP (0.173, 4.40mm Width) enables digital switch board space to be saved.As a result, it is packaged in a way that is referred to as Tube.As far as mounting is concerned, digital switch ic uses Surface Mount.For the analog part of the multiplexers, an IC Bus Switch is used.When the operating temperature is kept at -40°C~85°C, the machine will not be sensturn signal switchive to external influences.When digital controlled switch operates at 4.5V~5.5V, designers are provided with a greater degree of flexibility.Since they are members of the 74CBTD series, they can be used in a wide variety of applications.There is a design for terminating 8 as part of its basic configuration.To find signal switch's related components, a base part number of 74CBTD3306 may also be used.The voltage supplied for multiplexer's system is 5V.multiplexer's systemThere are 8 component pins in this turn signal switch.Conductors terminate at GULL WING in this design.Single is employed as its supply type.With 8 pins, it is configured.The multiplexer ic is mounted in the direction of Surface Mount.Among the family of CBT/FST/QS/5C/B the logic switch is a member.There are 1 bits signal multiplexer provides.For mux switch's normal operation, power supply 5V is provided.Bus Driver/Transceivers is a category for the digital switch ics.Without the influence of external factors, it consumes 1.5mA current of multiplexer ic.The performance of the multiplexers can be reliably maintained at a voltage of 5V.The resistance of the signal switching is 2.With a resistance of 20Ohm, it operates.There are a total of 2 channels used for transmitting data in the turn signal switch's circuit.In order to provide greater switches' flexibility, 64mA is provided as the output current.