banner_page

SN74CBTD3306CPWRE4

8 Terminations8 Pin Signal switch2 FunctionsMin 4.5V VMax 5.5V V


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74CBTD3306CPWRE4
  • Package: TSSOP
  • Datasheet: -
  • Stock: 449
  • Description: 8 Terminations8 Pin Signal switch2 FunctionsMin 4.5V VMax 5.5V V(Kg)

Details

Tags

Parameters
Mount Surface Mount
Package / Case TSSOP
Number of Pins 8
Weight 39.008944mg
Packaging Tape and Reel
JESD-609 Code e4
Moisture Sensitivity Level (MSL) 1
Number of Terminations 8
Resistance 20Ohm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Subcategory Bus Driver/Transceivers
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 5V
Terminal Pitch 0.65mm
Pin Count 8
Operating Supply Voltage 5V
Power Supplies 5V
Temperature Grade INDUSTRIAL
Number of Channels 2
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Number of Ports 2
Nominal Supply Current 1.5mA
Current - Output 64mA
Number of Bits 1
Propagation Delay 150 ps
Quiescent Current 1.5mA
Turn On Delay Time 4.7 ns
Family CBT/FST/QS/5C/B
Output Characteristics 3-STATE
Supply Type Single
Bandwidth 20MHz
Output Polarity TRUE
Logic IC Type BUS DRIVER
High Level Output Current -128mA
Low Level Output Current 128mA
Length 4.4mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Lead Free

SN74CBTD3306CPWRE4 Overview


The reason it is provided is that the board space can be saved by placing digital switch in the TSSOP.Tape and Reel is the method used for packaging.Its basic configuration includes terminations in the 8 range.In multiplexer's system, 5V is the voltage supplied.A component pin count of 8 can be found on this turn signal switch.GULL WING is used as the point at which the conductors come to an end as part of this formula.There is a type of supply of Single.The board has 8 pins configured.It is mounted in the way of Surface Mount.The logic switch object belongs to the family of CBT/FST/QS/5C/B.In this signal multiplexer, there are 1 bits provided.The power supply of 5V is provided for mux switch's normal operation.The digital switch ic is a part of an electronic system classified as Bus Driver/Transceivers.Without any external influences, it consumes 1.5mA current of multiplexer ic at all times.Supply voltages of 5V can provide reliable performance of the multiplexers.2 is the resistance at which it operates.With a resistance of 20Ohm, it operates.This turn signal switch's circuit uses 2 transmission channels.Signal switch operation at 85°C temperature is acceptable.In order to maintain a minimal operating temperature of the multiplexer, it should be set at -40°C.The relevant device specification specifies a maximum supply voltage of 5.5V for the signal switches.Device specifications require that the digital swith operate at a minimum supply voltage of 4.5V.IC BUS DRIVER is used for the logic of this chip.

SN74CBTD3306CPWRE4 Features


Supplied in the TSSOP package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
BUS DRIVER as the logic IC

SN74CBTD3306CPWRE4 Applications


There are a lot of Texas Instruments SN74CBTD3306CPWRE4 Signal Switches / Multiplexers / Decoders applications.

  • Signal router
  • Time division multiplexing system
  • To select different devices in microprocessor output
  • Encrypted communications system
  • Data communication
  • Data bus control
  • Arithmetic Logic Units
  • Memory chips
  • Code converters
  • Automatic health monitoring systems

Write a review

Note: HTML is not translated!
    Bad           Good