Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Weight |
72.603129mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Series |
74CBTD |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
Bus Switch |
Resistance |
7Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Bus Driver/Transceiver |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Base Part Number |
74CBTD3306 |
Pin Count |
8 |
Operating Supply Voltage |
5V |
Circuit |
1 x 1:1 |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Number of Channels |
2 |
Load Capacitance |
50pF |
Number of Ports |
2 |
Nominal Supply Current |
1.5mA |
Output Current |
64mA |
Number of Bits |
1 |
Throw Configuration |
SPST |
Propagation Delay |
250 ps |
Quiescent Current |
1.5mA |
Turn On Delay Time |
5.4 ns |
Family |
CBT/FST/QS/5C/B |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
20MHz |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Voltage Supply Source |
Single Supply |
Count Direction |
BIDIRECTIONAL |
Translation |
N/A |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74CBTD3306D Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 8-SOIC (0.154, 3.90mm Width).It is packaged according to the Tube method.Mounting is performed using Surface Mount.the multiplexers uses an analog IC Bus Switch.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 4.5V~5.5V.provides digital controlled switch's digital controlled switch'sSeveral applications are possible for 74CBTD series multiplexers.As part of its basic configuration, 8 terminations are designed as a part of it.The part number for 74CBTD3306 can be used to find its logic switch related parts as well.In this case, 5V is the voltage supplied to the multiplexer's system.A component pin count of 8 is found on this turn signal switch.GULL WING is used as the point at which the conductors come to an end as part of this formula.Its supply type is Single, which is used as the source of power.A total of 8 pins are configured on this board.The mounting point is Surface Mount.In the CBT/FST/QS/5C/B family, the logic switch is included.Signal multiplexer provides 1 bits.A power supply is provided for mux switch's normal operation of 5V.Bus Driver/Transceiver is the classification for this the digital switch ic.Without external influences, it consumes 1.5mA current of multiplexer ic.When a supply voltage of 5V is used, reliable performance of the multiplexers can be achieved.With a resistance of 0, it operates.7Ohm is the resistance at which it operates.This turn signal switch's circuit uses 2 transmission channels.64mA provides a high degree of switches' flexibility.
SN74CBTD3306D Features
Supplied in the 8-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBTD3306D Applications
There are a lot of Texas Instruments SN74CBTD3306D Signal Switches / Multiplexers / Decoders applications.
- Data bus control
- Decimal decoder
- Data distribution
- Paper plants
- Code conversion
- Logic circuits
- Medium scale TV wall
- Electronics industry
- D/A converters
- Seven segment displays