SN74CBTD3306PWG4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 7Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 1.5mA |
| Current - Output | 64mA |
| Number of Bits | 1 |
| Propagation Delay | 250 ps |
| Quiescent Current | 1.5mA |
| Turn On Delay Time | 5.4 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 20MHz |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Control Type | ENABLE LOW |
| Count Direction | BIDIRECTIONAL |
| Translation | N/A |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74CBTD3306PWG4 Overview
Digital switch is provided in the TSSOP for the purpose of saving board space.As a result, it is packaged in a way that is referred to as Rail/Tube.Its basic configuration includes terminations in the 8 range.For multiplexer's system, 5V voltage is supplied.Currently, this turn signal switch has a total of 8 component pins.As the end of conductors, it uses GULL WING.There is a type of supply of Single.Currently, it is configured with a 8 pin configuration.It is positioned in the direction of Surface Mount.Among the family of CBT/FST/QS/5C/B the logic switch is a member.In this signal multiplexer, there are 1 bits provided.In order to maintain mux switch's normal operation, power is provided to 5V.In electronic terms, the digital switch ic is classified as part number Bus Driver/Transceivers.Not being affected by the external factors, consumes 1.5mA current of multiplexer ic.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.As far as the resistance is concerned, it operates with 2.7Ohm is the resistance at which it operates.The turn signal switch's circuit consists of 2 transmission channels.85°C is an acceptable maximum temperature for this signal switch.Temperatures of the multiplexer should be kept at -40°C.Upon compliance with the applicable device specifications, the device will operate at the maximum supply voltage of 5.5V.A minimum supply voltage of 4.5V is specified for the digital swith in accordance with its applicable specifications.IC BUS DRIVER is used for the logic of this chip.
SN74CBTD3306PWG4 Features
Supplied in the TSSOP package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
BUS DRIVER as the logic IC
SN74CBTD3306PWG4 Applications
There are a lot of Texas Instruments SN74CBTD3306PWG4 Signal Switches / Multiplexers / Decoders applications.
- Analog to digital conversion
- Computer memory
- Medium scale TV wall
- Small scale TV wall
- Microprocessor memory systems
- Audio transmission
- Robotic vehicles
- GLAN
- CNC machines
- Data demultiplexing
