Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
8 |
Weight |
39.008944mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Cut Tape (CT) |
Series |
74CBTD |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
Bus Switch |
Resistance |
7Ohm |
Subcategory |
Bus Driver/Transceivers |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Base Part Number |
74CBTD3306 |
Pin Count |
8 |
Operating Supply Voltage |
5V |
Circuit |
1 x 1:1 |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Number of Channels |
2 |
Load Capacitance |
50pF |
Number of Ports |
2 |
Nominal Supply Current |
1.5mA |
Output Current |
64mA |
Number of Bits |
1 |
Throw Configuration |
SPST |
Propagation Delay |
250 ps |
Quiescent Current |
1.5mA |
Turn On Delay Time |
5.4 ns |
Family |
CBT/FST/QS/5C/B |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
20MHz |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Voltage Supply Source |
Single Supply |
Count Direction |
BIDIRECTIONAL |
Translation |
N/A |
Height |
1.2mm |
Length |
3mm |
Width |
4.4mm |
Thickness |
1mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74CBTD3306PWR Overview
It is included in the 8-TSSOP (0.173, 4.40mm Width) in order to save board space.It is packaged according to the Cut Tape (CT) method.The method digital switch ic adopts for mounting is Surface Mount.The analog IC used in the multiplexers can be referred to as Bus Switch.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.When operated with a 4.5V~5.5V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.The multiplexers from 74CBTD series can be used for a wide range of applications.There are 8 terminations included in its basic configuration.Its logic switch base part number is 74CBTD3306 which can also be used to find its logic switch related parts.The multiplexer's system is powered by 5V voltage.This turn signal switch has 8 component pins.As a result, GULL WING represents the end of the conductors.Single is used as its supply type.A total of 8 pins are configured on this board.The mount is in Surface Mount.The logic switch belongs to the family of CBT/FST/QS/5C/B.In this signal multiplexer, there are 1 bits provided.In order for 5V to operate normally, a power supply is provided.This is a signal switch that is categorized as Bus Driver/Transceivers.There are no external influences on this multiplexer ic, so it consumes 1.5mA current.It is possible to achieve reliable performance of the multiplexers with a voltage supply of 5V.The switches is packaged according to the way of TR.2 is the resistance at which it operates.In terms of resistance, it has a value of 7Ohm.The turn signal switch's circuit has 2 transmission channels.There is an output current of 64mA that allows for greater switches' flexibility.
SN74CBTD3306PWR Features
Supplied in the 8-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBTD3306PWR Applications
There are a lot of Texas Instruments SN74CBTD3306PWR Signal Switches / Multiplexers / Decoders applications.
- Relay
- Time division multiplexing system
- To select different devices in microprocessor input
- Logic circuits
- Recording transmission
- Robotic vehicles
- Code conversion
- A/D converters
- Computer memory
- Enabling different functions units in microprocessor instruction decoding