SN74CBTD3306PWRG4

8 Terminations4.5V~5.5V 8 Pin 74CBTD3306 Signal switch74CBTD Series 2 Functions

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74CBTD3306PWRG4
Package: 8-TSSOP (0.173, 4.40mm Width)
Datasheet: -
Stock: 517
Description: 8 Terminations4.5V~5.5V 8 Pin 74CBTD3306 Signal switch74CBTD Series 2 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP (0.173, 4.40mm Width)
Number of Pins	8
Weight	39.008944mg
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
Series	74CBTD
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Type	Bus Switch
Resistance	7Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Bus Driver/Transceivers
Packing Method	TR
Technology	CMOS
Voltage - Supply	4.5V~5.5V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Terminal Pitch	0.65mm
Base Part Number	74CBTD3306
Pin Count	8
Operating Supply Voltage	5V
Circuit	1 x 1:1
Power Supplies	5V
Number of Channels	2
Load Capacitance	50pF
Number of Ports	2
Nominal Supply Current	1.5mA
Output Current	64mA
Number of Bits	1
Propagation Delay	250 ps
Quiescent Current	1.5mA
Turn On Delay Time	5.4 ns
Family	CBT/FST/QS/5C/B
Output Characteristics	3-STATE
Supply Type	Single
Bandwidth	20MHz
Output Polarity	TRUE
High Level Output Current	-128mA
Low Level Output Current	128mA
Voltage Supply Source	Single Supply
Count Direction	BIDIRECTIONAL
Translation	N/A
Height	1.2mm
Length	3mm
Width	4.4mm
Thickness	1mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SN74CBTD3306PWRG4 Overview

Due to the fact that it is provided in the 8-TSSOP (0.173, 4.40mm Width), digital switch allows the board to be compacted.In this case, it is packaged as Tape & Reel (TR).Mounting is performed using Surface Mount.Bus Switch is the analog IC that the multiplexers uses.The operating temperature of -40°C~85°C will not be susceptible to external factors.When operated with a 4.5V~5.5V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.With the 74CBTD series, the multiplexers are suitable for a diverse range of applications.Among its basic configurations are 8 terminations.The base part number is 74CBTD3306, which is also useful when looking up signal switch's related components.The multiplexer's system is powered by 5V volts.Currently, this turn signal switch has a total of 8 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.Single is used as its supply type.The board has 8 pins configured.The mounting point is Surface Mount.The logic switch is a member of the CBT/FST/QS/5C/B family.As a result, signal multiplexer provides a total of 1 bits.In order for 5V to operate normally, a power supply is provided.Part number Bus Driver/Transceivers indicates that the digital switch ic is an electronic part.Without the influence of external factors, it consumes 1.5mA current of multiplexer ic.Using a supply voltage of 5V can result in reliable performance of the multiplexers.The switches package is packaged in a way which is consistent with TR.As far as the resistance is concerned, it operates with 2.As far as the resistance is concerned, it operates with 7Ohm.A total of 2 channels are used for transmission in the turn signal switch's circuit.It is possible to provide a current output of 64mA for greater switches' flexibility.