SN74CBTD3384CDBR

24 Terminations4.5V~5.5V 24 Pin 74CBTD3384 Signal switch74CBTD Series 10 Functions

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74CBTD3384CDBR
Package: 24-SSOP (0.209, 5.30mm Width)
Datasheet: -
Stock: 889
Description: 24 Terminations4.5V~5.5V 24 Pin 74CBTD3384 Signal switch74CBTD Series 10 Functions(Kg)

Details

Tags

Parameters
Output Current	64mA
Number of Bits	10
Throw Configuration	SPST
Propagation Delay	150 ps
Quiescent Current	1.5mA
Turn On Delay Time	4.8 ns
Family	CBT/FST/QS/5C/B
Output Characteristics	3-STATE
Supply Type	Single
Bandwidth	20MHz
Prop. Delay@Nom-Sup	0.15 ns
High Level Output Current	-128mA
Low Level Output Current	128mA
Voltage Supply Source	Single Supply
Independent Circuits	2
Count Direction	BIDIRECTIONAL
Height	2mm
Length	8.2mm
Width	5.3mm
Thickness	1.95mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	24-SSOP (0.209, 5.30mm Width)
Number of Pins	24
Weight	172.39345mg
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
Series	74CBTD
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	24
ECCN Code	EAR99
Type	Bus Switch
Resistance	20Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Bus Driver/Transceivers
Packing Method	TR
Technology	CMOS
Voltage - Supply	4.5V~5.5V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	10
Supply Voltage	5V
Terminal Pitch	0.65mm
Base Part Number	74CBTD3384
Pin Count	24
Operating Supply Voltage	5V
Circuit	5 x 1:1
Polarity	Non-Inverting
Power Supplies	5V
Load Capacitance	50pF
Number of Ports	2
Nominal Supply Current	1.5mA

SN74CBTD3384CDBR Overview

As a means of saving space, digital switch is provided in the 24-SSOP (0.209, 5.30mm Width).As a result, it is packaged in a way that is referred to as Tape & Reel (TR).For mounting, digital switch ic uses the method Surface Mount.A digital IC Bus Switch is used as the analog component of the multiplexers.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.Using a 4.5V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.Several applications are possible for 74CBTD series multiplexers.As parts of its basic configuration, 24 terminations are desgined.The base part number is 74CBTD3384, which can also be used to find its logic switch related parts.For multiplexer's system, a voltage of 5V is supplied.A component pin count of 24 is found on this turn signal switch.As a result, GULL WING represents the end of the conductors.As a type of supply, Single is employed.With 24 pins, it is configured.The mounting point is Surface Mount.There is a family of CBT/FST/QS/5C/B members.In the signal multiplexer, there are 10 bits available.In order to maintain mux switch's normal operation, power is provided to 5V.This is an the digital switch ic that is classified as Bus Driver/Transceivers.Without external influences, it consumes 1.5mA current of multiplexer ic.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 5V.According to TR, the switches is packaged.The resistance of the signal switching is 2.The system operates with a resistance of 20Ohm.For higher switches' flexibility, the output current is set to 64mA.