Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
24-SOIC (0.295, 7.50mm Width) |
Number of Pins |
24 |
Weight |
624.398247mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74CBTD |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
24 |
Type |
Bus Switch |
Resistance |
20Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Bus Driver/Transceivers |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
74CBTD3384 |
Pin Count |
24 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
5V |
Circuit |
5 x 1:1 |
Power Supplies |
5V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Nominal Supply Current |
1.5mA |
Output Current |
64mA |
Number of Bits |
10 |
Propagation Delay |
150 ps |
Family |
CBT/FST/QS/5C/B |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
20MHz |
Output Polarity |
TRUE |
Prop. Delay@Nom-Sup |
0.15 ns |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
2 |
Count Direction |
BIDIRECTIONAL |
Height |
2.65mm |
Length |
15.4mm |
Width |
7.5mm |
Thickness |
2.35mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74CBTD3384CDWRG4 Overview
In order to conserve board space, digital switch is included in the 24-SOIC (0.295, 7.50mm Width).In this case, it is packaged as Tape & Reel (TR).The mounting method digital switch ic uses is Surface Mount.A digital IC Bus Switch is used as the analog component of the multiplexers.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 4.5V~5.5V.provides digital controlled switch's digital controlled switch'sIn addition to being a member of the 74CBTD series, these multiplexers have a wide range of applications.Among its basic configurations are 24 terminations.There is a base part number 74CBTD3384 that can be used to locate signal switch's related components as well.For multiplexer's system, 5V voltage is supplied.In this turn signal switch, there are 24 component pins.As the end of conductors, it uses GULL WING.Single is employed as its supply type.This multiplexer ic is configured with 24 pins.The mount is in Surface Mount.The logic switch object belongs to the family of CBT/FST/QS/5C/B.As a result, signal multiplexer provides a total of 10 bits.mux switch's normal operation requires the power supply of 5V.The digital switch ic is an electronic part classified into Bus Driver/Transceivers.With a supply voltage of 5V, reliable performance of the multiplexers can be achieved.The switches package is packaged in a way which is consistent with TR.2 is the resistance at which it operates.A resistance of 20Ohm is used to operate it.For higher switches' flexibility, the output current is set to 64mA.
SN74CBTD3384CDWRG4 Features
Supplied in the 24-SOIC (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBTD3384CDWRG4 Applications
There are a lot of Texas Instruments SN74CBTD3384CDWRG4 Signal Switches / Multiplexers / Decoders applications.
- Metal detectors
- Computer memory
- Enabling block of memory depending on address in memory chips
- Data collection system
- D/A converters
- CPU memory location identification
- Implementing boolean functions with multiple variables
- Solenoid cooling fan
- Recording transmission
- Image transmission