banner_page

SN74CBTD3384CPWG4

24 Terminations24 Pin Signal switch2 FunctionsMin 4.5V VMax 5.5V V


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74CBTD3384CPWG4
  • Package: TSSOP
  • Datasheet: -
  • Stock: 470
  • Description: 24 Terminations24 Pin Signal switch2 FunctionsMin 4.5V VMax 5.5V V(Kg)

Details

Tags

Parameters
Mount Surface Mount
Package / Case TSSOP
Number of Pins 24
Weight 89.499445mg
JESD-609 Code e4
Moisture Sensitivity Level (MSL) 1
Number of Terminations 24
Resistance 20Ohm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Subcategory Bus Driver/Transceivers
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 5V
Terminal Pitch 0.65mm
Pin Count 24
Operating Supply Voltage 5V
Power Supplies 5V
Temperature Grade INDUSTRIAL
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Number of Ports 2
Nominal Supply Current 1.5mA
Current - Output 64mA
Number of Bits 10
Propagation Delay 150 ps
Quiescent Current 1.5mA
Turn On Delay Time 4.8 ns
Family CBT/FST/QS/5C/B
Output Characteristics 3-STATE
Supply Type Single
Bandwidth 20MHz
Output Polarity TRUE
Logic IC Type BUS DRIVER
High Level Output Current -128mA
Low Level Output Current 128mA
Independent Circuits 2
Height 1.15mm
Length 7.8mm
Width 4.4mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Lead Free

SN74CBTD3384CPWG4 Overview


Providing this information in the TSSOP enables digital switch board space to be saved.There are 24 terminations included in its basic configuration.The multiplexer's system is powered by 5V volts.In this turn signal switch, there are 24 components that can be connected to each pin.A conductor terminates at GULL WING.There is a type of supply of Single.The board is configured with 24 pins.As you can see, it is mounted in the direction of Surface Mount.I would like to refer to the logic switch as a member of the CBT/FST/QS/5C/B family.There are 10 bits signal multiplexer provides.For mux switch's normal operation, there is a power supply provided at 5V.Bus Driver/Transceivers is the classification for this the digital switch ic.Despite not interacting with external factors, it consumes 1.5mA current of multiplexer ic.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.A resistance of 2 is used to operate the signal switching.With a resistance of 20Ohm, it operates.The signal switch can operate at a maximum temperature of 85°C.In order to maintain a minimal operating temperature of the multiplexer, it should be set at -40°C.Upon compliance with the applicable device specifications, the device will operate at the maximum supply voltage of 5.5V.The digital swith is specified to operate at the minimum supply voltage of 4.5V in compliance with the applicable device specification.As its logic IC, it uses BUS DRIVER.

SN74CBTD3384CPWG4 Features


Supplied in the TSSOP package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
BUS DRIVER as the logic IC

SN74CBTD3384CPWG4 Applications


There are a lot of Texas Instruments SN74CBTD3384CPWG4 Signal Switches / Multiplexers / Decoders applications.

  • Paper plants
  • To select different devices in microprocessor input
  • Signal router
  • Automatic Monitoring systems
  • VGA
  • Computer memory
  • CPU memory location identification
  • Electronics industry
  • D/A converters
  • GLAN

Write a review

Note: HTML is not translated!
    Bad           Good