SN74CBTD3384DBQR

24 Terminations4.5V~5.5V 24 Pin 74CBTD3384 Signal switch74CBTD Series 2 Functions

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74CBTD3384DBQR
Package: 24-SSOP (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 700
Description: 24 Terminations4.5V~5.5V 24 Pin 74CBTD3384 Signal switch74CBTD Series 2 Functions(Kg)

Details

Tags

Parameters
Series	74CBTD
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	24
ECCN Code	EAR99
Type	Bus Switch
Resistance	7Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Bus Driver/Transceivers
Packing Method	TR
Technology	CMOS
Voltage - Supply	4.5V~5.5V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Terminal Pitch	0.64mm
Base Part Number	74CBTD3384
Pin Count	24
Operating Supply Voltage	5V
Circuit	5 x 1:1
Polarity	Non-Inverting
Power Supplies	5V
Load Capacitance	50pF
Number of Ports	2
Nominal Supply Current	1.5mA
Output Current	64mA
Number of Bits	10
Throw Configuration	SPST
Propagation Delay	250 ps
Quiescent Current	1.5mA
Turn On Delay Time	7 ns
Family	CBT/FST/QS/5C/B
Output Characteristics	3-STATE
Supply Type	Single
Bandwidth	20MHz
Address Bus Width	10b
High Level Output Current	-128mA
Low Level Output Current	128mA
Voltage Supply Source	Single Supply
Independent Circuits	2
Count Direction	BIDIRECTIONAL
Height	1.75mm
Length	8.65mm
Width	3.9mm
Thickness	1.5mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	24-SSOP (0.154, 3.90mm Width)
Number of Pins	24
Weight	129.500622mg
Operating Temperature	-40°C~85°C
Packaging	Cut Tape (CT)

SN74CBTD3384DBQR Overview

Providing this information in the 24-SSOP (0.154, 3.90mm Width) enables digital switch board space to be saved.As a result, it is packaged in the way of Cut Tape (CT).digital switch ic uses the method of Surface Mount for mounting.For the analog part of the multiplexers, an IC Bus Switch is used.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.With a supply voltage of 4.5V~5.5V, designers have greater flexibility of digital controlled switch.With the 74CBTD series, the multiplexers are suitable for a diverse range of applications.The basic configuration includes 24 terminations.The base part number is 74CBTD3384, so you can find its logic switch related parts using that number.The multiplexer's system is powered by 5V voltage.This turn signal switch consists of 24 component pins.As the end of conductors, it uses GULL WING.Single is employed as its supply type.The board is configured with 24 pins.Surface Mount is the way it is mounted.The logic switch is a member of the family of CBT/FST/QS/5C/B.Signal multiplexer provides 10 bits.mux switch's normal operation requires the power supply of 5V.In electronic terms, the digital switch ic is classified as Bus Driver/Transceivers.It consumes 1.5mA current of multiplexer ic since it is not affected by external factors.Supply voltages of 5V can provide reliable performance of the multiplexers.A TR packaging method is used in the switches.As far as the resistance is concerned, it operates with 2.A resistance of 7Ohm is used to operate it.The output current of 64mA is provided for higher switches' flexibility.