Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
24-TFSOP (0.173, 4.40mm Width) |
Number of Pins |
24 |
Weight |
60.894776mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74CBTD |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
24 |
ECCN Code |
EAR99 |
Type |
Bus Switch |
Resistance |
7Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Bus Driver/Transceivers |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.4mm |
Base Part Number |
74CBTD3384 |
Pin Count |
24 |
Operating Supply Voltage |
5V |
Circuit |
5 x 1:1 |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Nominal Supply Current |
1.5mA |
Output Current |
64mA |
Number of Bits |
5 |
Throw Configuration |
SPST |
Propagation Delay |
250 ps |
Quiescent Current |
1.5mA |
Turn On Delay Time |
7 ns |
Family |
CBT/FST/QS/5C/B |
Number of Inputs |
10 |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
20MHz |
Address Bus Width |
10b |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
2 |
Count Direction |
BIDIRECTIONAL |
Height |
1.2mm |
Length |
5mm |
Width |
4.4mm |
Thickness |
1.05mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74CBTD3384DGVR Overview
Providing this information in the 24-TFSOP (0.173, 4.40mm Width) enables digital switch board space to be saved.Tape & Reel (TR) is the packaging method.As far as mounting is concerned, digital switch ic uses Surface Mount.the multiplexers uses an analog IC Bus Switch.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.The turn signal switch is designed for use with a 4.5V~5.5V supply voltage, which gives it a lot of flexibility.As a member of 74CBTD series, the multiplexers can be used for a wide range of applications.Among its basic configurations are 24 terminations.You can also find related parts by using its logic switch base part number of 74CBTD3384.The turn signal switch is supplied with a voltage of 5V volts.There are 24 component pins in this turn signal switch.Conductors terminate at GULL WING in this design.Single is employed as its supply type.With 24 pins, it is configured.Surface Mount is the way it is mounted.The logic switch belongs to the family of CBT/FST/QS/5C/B.In this signal multiplexer, there are 5 bits that are provided.A power supply is provided for mux switch's normal operation of 5V.Part number Bus Driver/Transceivers indicates that the digital switch ic is an electronic part.In the absence of external influences, it consumes 1.5mA current of multiplexer ic.It is possible to achieve reliable performance of the multiplexers with a voltage supply of 5V.This multiplexer provides 10 inputs.The switches packaging is based on TR.The signal switching operates with a resistance of 2.The resistance of the signal switching is 7Ohm.In order to provide greater switches' flexibility, 64mA is provided as the output current.
SN74CBTD3384DGVR Features
Supplied in the 24-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBTD3384DGVR Applications
There are a lot of Texas Instruments SN74CBTD3384DGVR Signal Switches / Multiplexers / Decoders applications.
- Communication system
- Data collection system
- Data demultiplexing
- HD surveillance system
- Automation system
- Memory chips
- Metal detectors
- Home automation system
- Memory system of computers
- Combinational circuit