SN74CBTD3384DW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74CBTD |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 7Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | 74CBTD3384 |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Circuit | 5 x 1:1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 1.5mA |
| Output Current | 64mA |
| Number of Bits | 5 |
| Throw Configuration | SPST |
| Propagation Delay | 7 ns |
| Quiescent Current | 1.5mA |
| Turn On Delay Time | 7 ns |
| Family | CBT/FST/QS/5C/B |
| Number of Inputs | 10 |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 20MHz |
| Turn-Off Delay Time | 5.3 ns |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Count Direction | BIDIRECTIONAL |
| Height | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBTD3384DW Overview
Due to the lack of space on the board, digital switch is provided in the 24-SOIC (0.295, 7.50mm Width).As a result, it is packaged in the way of Tube.The mounting method digital switch ic uses is Surface Mount.The analog IC used in the multiplexers can be referred to as Bus Switch.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.Designers have greater flexibility using digital controlled switch when it works with 4.5V~5.5V voltage.Multiplexers from the 74CBTD series can be used in a wide range of applications.It is designed with 24 terminations as part of its basic configuration.The part number for 74CBTD3384 can be used to find its logic switch related parts as well.The turn signal switch is supplied with a voltage of 5V volts.This turn signal switch consists of 24 component pins.A conductor terminates at GULL WING.In this case, Single is employed as the supply type.A configuration of 24 pins is used.It is mounted in the way of Surface Mount.The logic switch is a member of the CBT/FST/QS/5C/B family.Signal multiplexer provides 5 bits.It is provided that 5V has a power supply in order to function normally.Part number Bus Driver/Transceivers indicates that the digital switch ic is an electronic part.Without external influences, it consumes 1.5mA current of multiplexer ic.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.The multiplexer is equipped with 10 inputs.A resistance of 2 governs its operation.A resistance of 7Ohm is used to operate the signal switching.64mA provides a high degree of switches' flexibility.
SN74CBTD3384DW Features
Supplied in the 24-SOIC (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBTD3384DW Applications
There are a lot of Texas Instruments SN74CBTD3384DW Signal Switches / Multiplexers / Decoders applications.
- VGA
- Memory system of computers
- Speed control of medern motors
- Microprocessor input/output systems
- Automatic health monitoring systems
- Arithmetic Logic Units
- Data-routing applications
- Code conversion
- D/A converters
- Analog, digital or video signal switching
