Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
24-SOIC (0.295, 7.50mm Width) |
Number of Pins |
24 |
Weight |
624.398247mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74CBTD |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
24 |
ECCN Code |
EAR99 |
Type |
Bus Switch |
Resistance |
7Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Bus Driver/Transceivers |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Base Part Number |
74CBTD3384 |
Pin Count |
24 |
Operating Supply Voltage |
5V |
Circuit |
5 x 1:1 |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Nominal Supply Current |
1.5mA |
Output Current |
64mA |
Number of Bits |
10 |
Throw Configuration |
SPST |
Propagation Delay |
7 ns |
Quiescent Current |
1.5mA |
Turn On Delay Time |
7 ns |
Family |
CBT/FST/QS/5C/B |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
20MHz |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
2 |
Count Direction |
BIDIRECTIONAL |
Height |
2.65mm |
Length |
15.4mm |
Width |
7.5mm |
Thickness |
2.35mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74CBTD3384DWR Overview
As a means of saving space, digital switch is provided in the 24-SOIC (0.295, 7.50mm Width).Tape & Reel (TR) represents its packaging.Digital switch ic uses a Surface Mount mounting method.As the analog part, the circuit uses an analog IC Bus Switch.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.The turn signal switch is designed for use with a 4.5V~5.5V supply voltage, which gives it a lot of flexibility.The multiplexers from 74CBTD series can be used for a wide range of applications.As part of its basic configuration, 24 terminations are designed as a part of it.The base part number is 74CBTD3384, which can also be used to find its logic switch related parts.The multiplexer's system is supplied with a voltage of 5V.In this turn signal switch, there are 24 components that can be connected to each pin.As a result, conductors end at GULL WING.This supply type employs Single.With 24 pins, it is configured.It is positioned in the direction of Surface Mount.In the CBT/FST/QS/5C/B family, the logic switch is included.As a result, signal multiplexer provides 10 bits.In order for 5V to operate normally, a power supply is provided.Bus Driver/Transceivers is the classification for this the digital switch ic.Not being affected by the external factors, consumes 1.5mA current of multiplexer ic.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 5V.The switches package is packaged in accordance with the TR method.A resistance of 2 is used to operate the signal switching.The resistance of the signal switching is 7Ohm.Higher switches' flexibility is provided by providing 64mA as the output current.
SN74CBTD3384DWR Features
Supplied in the 24-SOIC (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBTD3384DWR Applications
There are a lot of Texas Instruments SN74CBTD3384DWR Signal Switches / Multiplexers / Decoders applications.
- Electronically controlled engine system
- Transmission from the computer system of a satellite
- Make full adder
- LVDS
- Textile mills
- Analog, digital or video signal switching
- Microprocessor instruction decoding
- Recording transmission
- Arithmetic Logic Units
- Memory system of computers