SN74CBTD3384PWG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 24 |
| Weight | 89.499445mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 24 |
| Resistance | 7Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Ports | 2 |
| Nominal Supply Current | 1.5mA |
| Current - Output | 64mA |
| Number of Bits | 10 |
| Propagation Delay | 250 ps |
| Quiescent Current | 1.5mA |
| Turn On Delay Time | 7 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 20MHz |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Independent Circuits | 2 |
| Height | 1.15mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74CBTD3384PWG4 Overview
Digital switch is provided in the TSSOP for the purpose of saving board space.Among its basic features are 24 terminations.The multiplexer's system is powered by 5V volts.Currently, this turn signal switch has a total of 24 component pins.A conductor terminates at GULL WING.Single is used as its supply type.The board is configured with 24 pins.It is positioned in the direction of Surface Mount.The logic switch is a member of the CBT/FST/QS/5C/B family.Signal multiplexer contains 10 bits.There is a power supply provided for the mux switch's normal operation of 5V.In electronic terms, the digital switch ic is classified as Bus Driver/Transceivers.There are no external influences on this multiplexer ic, so it consumes 1.5mA current.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 5V.2 ports are used for some other peripheral signal switchings to plug in.The system operates with a resistance of 7Ohm.A maximum temperature of 85°C is acceptable for this signal switch.A temperature of the multiplexer of -40°C should be maintained for minimal operation.In compliance with the applicable device specification, the signal switches has a maximum supply voltage of 5.5V.A minimum supply voltage of 4.5V is specified for the digital swith in accordance with its applicable specifications.For its logic, IC BUS DRIVER is used.
SN74CBTD3384PWG4 Features
Supplied in the TSSOP package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
BUS DRIVER as the logic IC
SN74CBTD3384PWG4 Applications
There are a lot of Texas Instruments SN74CBTD3384PWG4 Signal Switches / Multiplexers / Decoders applications.
- Make half adder
- Steel plants
- Solenoid cooling fan
- Automatic Monitoring systems
- Video transmission
- Speed control of medern motors
- Memory chips
- CNC machines
- Small scale TV wall
- Arithmetic Logic Units
