SN74CBTD3384PWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Weight | 89.499445mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74CBTD |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 7Ohm |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74CBTD3384 |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Circuit | 5 x 1:1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Max Supply Current | 1.5mA |
| Number of Bits | 5 |
| Throw Configuration | SPST |
| Propagation Delay | 250 ps |
| Quiescent Current | 1.5mA |
| Turn On Delay Time | 7 ns |
| Family | CBT/FST/QS/5C/B |
| Number of Inputs | 10 |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 20MHz |
| Turn-Off Delay Time | 5.3 ns |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Count Direction | BIDIRECTIONAL |
| Height | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBTD3384PWR Overview
In order to conserve board space, digital switch is included in the 24-TSSOP (0.173, 4.40mm Width).Cut Tape (CT) is the method used for packaging.As far as mounting is concerned, digital switch ic uses Surface Mount.In the multiplexers, the analog IC Bus Switch is used.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.Designers have greater flexibility when digital controlled switch operates at a 4.5V~5.5V supply voltage.These multiplexers are members of the 74CBTD series, which provide extensive application potential.The basic configuration of this system includes 24 terminations.There is a base part number 74CBTD3384 that can be used to locate signal switch's related components as well.The multiplexer's system works with 5V voltage.Currently, this turn signal switch has a total of 24 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.In this case, Single is employed as the supply type.With 24 pins, it is configured.Surface Mount is the way it is mounted.The CBT/FST/QS/5C/B family includes the logic switch.As a result, signal multiplexer provides 5 bits.For mux switch's normal operation, there is a power supply provided at 5V.The digital switch ic is an electronic part classified into Bus Driver/Transceivers.Not being affected by the external factors, consumes 1.5mA current of multiplexer ic.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.It is provided with 10 inputs.According to TR, the switches is packaged.The resistance is 2.As far as the resistance is concerned, it operates with 7Ohm.For higher switches' flexibility, 64mA is provided as an output current.
SN74CBTD3384PWR Features
Supplied in the 24-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBTD3384PWR Applications
There are a lot of Texas Instruments SN74CBTD3384PWR Signal Switches / Multiplexers / Decoders applications.
- RF-based home automation system
- Electronically controlled engine system
- Microprocessor memory systems
- PCIe
- War field flying robot with a night vision flying camera
- To select different devices in microprocessor input
- Data transfer
- Automatic Monitoring systems
- Data distribution
- Analog to digital conversion
