Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
24-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
24 |
Weight |
89.499445mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74CBTD |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
24 |
ECCN Code |
EAR99 |
Type |
Bus Switch |
Resistance |
7Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Bus Driver/Transceivers |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Base Part Number |
74CBTD3384 |
Pin Count |
24 |
Operating Supply Voltage |
5V |
Circuit |
5 x 1:1 |
Power Supplies |
5V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Nominal Supply Current |
1.5mA |
Output Current |
64mA |
Number of Bits |
10 |
Propagation Delay |
7 ns |
Quiescent Current |
1.5mA |
Turn On Delay Time |
250 ps |
Family |
CBT/FST/QS/5C/B |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
20MHz |
Output Polarity |
TRUE |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
2 |
Count Direction |
BIDIRECTIONAL |
Height |
1.2mm |
Length |
7.8mm |
Width |
4.4mm |
Thickness |
1mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74CBTD3384PWRE4 Overview
It is included in the 24-TSSOP (0.173, 4.40mm Width) in order to save board space.As a result, it is packaged in a way that is referred to as Tape & Reel (TR).In terms of mounting, digital switch ic uses the method of Surface Mount.the multiplexers uses IC Bus Switch as the analog IC.When the operating temperature is kept at -40°C~85°C, the machine will not be sensturn signal switchive to external influences.With a supply voltage of 4.5V~5.5V, designers have greater flexibility of digital controlled switch.As a member of 74CBTD series, the multiplexers can be used for a wide range of applications.As part of its basic configuration, 24 terminations are designed as a part of it.The base part number is 74CBTD3384, which is also useful when looking up signal switch's related components.For multiplexer's system, a voltage of 5V is supplied.A component pin count of 24 is found on this turn signal switch.As the end of conductors, it uses GULL WING.Single is employed as its supply type.Currently, it is configured with 24 pins.Multiplexer ics are mounted in the direction of Surface Mount.There is a family of CBT/FST/QS/5C/B members.Signal multiplexer consists of 10 bits.In order to maintain mux switch's normal operation, power is provided to 5V.This is an the digital switch ic that is classified as Bus Driver/Transceivers.Not being affected by the external factors, consumes 1.5mA current of multiplexer ic.When a supply voltage of 5V is used, reliable performance of the multiplexers can be achieved.The signal switching is packaged by TR. The resistance is 2.In terms of resistance, it has a value of 7Ohm.The output current of 64mA is provided for higher switches' flexibility.
SN74CBTD3384PWRE4 Features
Supplied in the 24-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBTD3384PWRE4 Applications
There are a lot of Texas Instruments SN74CBTD3384PWRE4 Signal Switches / Multiplexers / Decoders applications.
- Data collection system
- Implementing boolean functions with multiple variables
- CPU memory location identification
- Relay
- Robotic vehicles
- Data-routing applications
- Electronics industry
- Make full adder
- War field flying robot with a night vision flying camera
- HD surveillance system