SN74CBTD3861DBR
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 24 |
| Weight | 172.39345mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74CBTD |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 7Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74CBTD3861 |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Circuit | 10 x 1:1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 1.5mA |
| Output Current | 64mA |
| Number of Bits | 10 |
| Throw Configuration | SPST |
| Propagation Delay | 350 ps |
| Quiescent Current | 1.5mA |
| Turn On Delay Time | 10 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 20MHz |
| Nominal Input Voltage | 2V |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Power Supply Current-Max (ICC) | 0.003mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Count Direction | BIDIRECTIONAL |
| Height | 2mm |
| Length | 8.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBTD3861DBR Overview
Providing this information in the 24-SSOP (0.209, 5.30mm Width) enables digital switch board space to be saved.It is packaged in the way of Cut Tape (CT).Digital switch ic adheres to a mounting method of Surface Mount.the multiplexers uses IC Bus Switch as the analog IC.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.Using a 4.5V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.The multiplexers from 74CBTD series can be used for a wide range of applications.There are 24 terminations included in its basic configuration.Its logic switch base part number is 74CBTD3861 which can also be used to find its logic switch related parts.For multiplexer's system, 5V voltage is supplied.There are 24 component pins in this turn signal switch.GULL WING is used as the point at which the conductors come to an end as part of this formula.Its supply type is Single, which is used as the source of power.It is configured with 24 pins.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch belongs to the family of CBT/FST/QS/5C/B.In this signal multiplexer, there are 10 bits provided.The power supply of 5V is provided for mux switch's normal operation.Bus Driver/Transceivers is the classification for this the digital switch ic.Without the influence of external factors, it consumes 1.5mA current of multiplexer ic.Reliable performance of the multiplexers can be achieved when a supply voltage of 5V is provided.The switches package is packaged in a way which is consistent with TR.The signal switching operates with a resistance of 2.With a resistance of 7Ohm, it operates.For increased switches' flexibility, the output current of 64mA is provided.
SN74CBTD3861DBR Features
Supplied in the 24-SSOP (0.209, 5.30mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBTD3861DBR Applications
There are a lot of Texas Instruments SN74CBTD3861DBR Signal Switches / Multiplexers / Decoders applications.
- Control unit of Central Processing unit (CPU)
- To select different devices in microprocessor input
- Time division multiplexing system
- CNC machines
- Used to connect a single source to multiple destinations
- Memory system of computers
- Implementing boolean functions with multiple variables
- Analog, digital or video signal switching
- Code conversion
- A/D converters
