banner_page

SN74CBTD3861DBRG4

24 Terminations24 Pin Signal switch1 FunctionsMin 4.5V VMax 5.5V V


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74CBTD3861DBRG4
  • Package: SSOP
  • Datasheet: PDF
  • Stock: 157
  • Description: 24 Terminations24 Pin Signal switch1 FunctionsMin 4.5V VMax 5.5V V(Kg)

Details

Tags

Parameters
Number of Ports 2
Nominal Supply Current 1.5mA
Current - Output 64mA
Number of Bits 10
Propagation Delay 10 ns
Quiescent Current 1.5mA
Turn On Delay Time 350 ps
Family CBT/FST/QS/5C/B
Output Characteristics 3-STATE
Supply Type Single
Bandwidth 20MHz
Output Polarity TRUE
Logic IC Type BUS DRIVER
High Level Output Current -128mA
Low Level Output Current 128mA
Independent Circuits 1
Height 1.95mm
Length 8.2mm
Width 5.3mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Lead Free
Mount Surface Mount
Package / Case SSOP
Number of Pins 24
Weight 172.39345mg
JESD-609 Code e4
Moisture Sensitivity Level (MSL) 1
Number of Terminations 24
Resistance 7Ohm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Additional Feature TTL COMPATIBLE BUS SWITCH
Subcategory Bus Driver/Transceivers
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.65mm
Pin Count 24
Operating Supply Voltage 5V
Power Supplies 5V
Temperature Grade INDUSTRIAL
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V

SN74CBTD3861DBRG4 Overview


The reason it is provided is that the board space can be saved by placing digital switch in the SSOP.This configuration includes 24 terminations as part of its basic functionality.For multiplexer's system, 5V voltage is supplied.This turn signal switch has 24 component pins.As the end of conductors, it uses GULL WING.As a type of supply, Single is employed.There are 24 pins on it.The mounting is in the way of Surface Mount.There is a family of CBT/FST/QS/5C/B members.Signal multiplexer consists of 10 bits.For mux switch's normal operation, there is a power supply provided at 5V.The digital switch ic is an electronic part classified into Bus Driver/Transceivers.Without external influences, it consumes 1.5mA current of multiplexer ic.When a supply voltage of 5V is used, reliable performance of the multiplexers can be achieved.A resistance of 2 is used to operate the signal switching.This signal switching operates at a resistance of 7Ohm.In this case, operating this signal switch at 85°C is acceptable.In order to maintain a minimal operating temperature, the temperature of the multiplexer should be set to -40°C.Based on the device specifications, the signal switches is designed to operate at 5.5V maximum supply voltage.A minimum supply voltage of 4.5V is specified for the digital swith by its applicable specification.In addition, TTL COMPATIBLE BUS SWITCH exhibits improved characteristics.In order to implement its logic, it makes use of IC BUS DRIVER.

SN74CBTD3861DBRG4 Features


Supplied in the SSOP package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
TTL COMPATIBLE BUS SWITCH
BUS DRIVER as the logic IC

SN74CBTD3861DBRG4 Applications


There are a lot of Texas Instruments SN74CBTD3861DBRG4 Signal Switches / Multiplexers / Decoders applications.

  • Seven segment displays
  • CPU memory location identification
  • Data demultiplexing
  • Image transmission
  • Signal router
  • Microprocessor instruction decoding
  • War field flying robot with a night vision flying camera
  • Steel plants
  • Data communication
  • Analog to digital conversion

Write a review

Note: HTML is not translated!
    Bad           Good