Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
24-TFSOP (0.173, 4.40mm Width) |
Number of Pins |
24 |
Weight |
60.894776mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74CBTD |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
24 |
ECCN Code |
EAR99 |
Type |
Bus Switch |
Resistance |
7Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Bus Driver/Transceivers |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.4mm |
Base Part Number |
74CBTD3861 |
Pin Count |
24 |
Operating Supply Voltage |
5V |
Circuit |
10 x 1:1 |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Nominal Supply Current |
1.5mA |
Output Current |
64mA |
Number of Bits |
10 |
Throw Configuration |
SPST |
Propagation Delay |
350 ps |
Quiescent Current |
1.5mA |
Turn On Delay Time |
10 ns |
Family |
CBT/FST/QS/5C/B |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
20MHz |
Address Bus Width |
10b |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Power Supply Current-Max (ICC) |
0.003mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
1 |
Count Direction |
BIDIRECTIONAL |
Height |
1.2mm |
Length |
5mm |
Width |
4.4mm |
Thickness |
1.05mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74CBTD3861DGVR Overview
It is included in the 24-TFSOP (0.173, 4.40mm Width) in order to save board space.The package is packaged in the manner of Tape & Reel (TR).The method digital switch ic adopts for mounting is Surface Mount.In the multiplexers, the analog IC Bus Switch is used.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.When operated with a 4.5V~5.5V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.Several applications are possible for 74CBTD series multiplexers.There is a design for terminating 24 as part of its basic configuration.As its base part number is 74CBTD3861, logic switch can also be used to find its related parts.The multiplexer is supplied with 5V voltage.This turn signal switch has a total of 24 component pins.As a result, GULL WING represents the end of the conductors.This supply type employs Single.This multiplexer ic is configured with 24 pins.The multiplexer ic is mounted in the direction of Surface Mount.Among the family of CBT/FST/QS/5C/B the logic switch is a member.In the signal multiplexer, there are 10 bits available.The power supply of 5V is provided for mux switch's normal operation.Bus Driver/Transceivers is a category for the digital switch ics.Despite not interacting with external factors, it consumes 1.5mA current of multiplexer ic.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.The switches package is packaged in accordance with the TR method.A resistance of 2 is used to operate the signal switching.As far as the resistance is concerned, it operates with 7Ohm.It is possible to provide a current output of 64mA for greater switches' flexibility.
SN74CBTD3861DGVR Features
Supplied in the 24-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBTD3861DGVR Applications
There are a lot of Texas Instruments SN74CBTD3861DGVR Signal Switches / Multiplexers / Decoders applications.
- Data communication
- Communication system
- Night vision cameras
- Automatic Monitoring systems
- Automatic health monitoring systems
- Microprocessor instruction decoding
- A robotic vehicle with the metal detector
- To select different task for memory in microprocessor memory systems
- Code conversion
- Image transmission