Parameters |
Number of Pins |
24 |
Weight |
624.398247mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Series |
74CBTD |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
24 |
Termination |
SMD/SMT |
ECCN Code |
EAR99 |
Type |
Bus Switch |
Resistance |
7Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Bus Driver/Transceivers |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
74CBTD3861 |
Pin Count |
24 |
Max Output Current |
64mA |
Operating Supply Voltage |
5V |
Circuit |
10 x 1:1 |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Nominal Supply Current |
1.5mA |
Output Current |
64mA |
Number of Bits |
10 |
Throw Configuration |
SPST |
Propagation Delay |
350 ps |
Quiescent Current |
1.5mA |
Turn On Delay Time |
10 ns |
Family |
CBT/FST/QS/5C/B |
Number of Inputs |
10 |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
20MHz |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Power Supply Current-Max (ICC) |
0.003mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
1 |
Count Direction |
BIDIRECTIONAL |
Height |
2.65mm |
Length |
15.4mm |
Width |
7.5mm |
Thickness |
2.35mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
24-SOIC (0.295, 7.50mm Width) |
SN74CBTD3861DW Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 24-SOIC (0.295, 7.50mm Width).In this case, it is packaged as Tube.Digital switch ic adheres to a mounting method of Surface Mount.Bus Switch is the analog IC that the multiplexers uses.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.The turn signal switch is designed for use with a 4.5V~5.5V supply voltage, which gives it a lot of flexibility.With the 74CBTD series, the multiplexers are suitable for a diverse range of applications.As parts of its basic configuration, 24 terminations are desgined.There is a base part number of 74CBTD3861 which can also be used in order to locate the logic switch that are related to this item.The multiplexer's system is powered by 5V voltage.This turn signal switch has 24 component pins.GULL WING represents the end of conductors.In this case, the supply type is Single.A configuration of 24 pins is used.The multiplexer ic is mounted in the direction of Surface Mount.In the CBT/FST/QS/5C/B family, the logic switch is included.As a result, signal multiplexer provides 10 bits.For mux switch's normal operation, there is a power supply provided at 5V.The digital switch ic is an electronic part classified into Bus Driver/Transceivers.No external influence consumes 1.5mA current of multiplexer ic.Using a supply voltage of 5V can result in reliable performance of the multiplexers.This multiplexer has a total of 10 inputs.2 is the resistance at which it operates.It operates with a resistance of 7Ohm.64mA provides a high degree of switches' flexibility.
SN74CBTD3861DW Features
Supplied in the 24-SOIC (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBTD3861DW Applications
There are a lot of Texas Instruments SN74CBTD3861DW Signal Switches / Multiplexers / Decoders applications.
- Used to connect a single source to multiple destinations
- Microprocessor input/output systems
- Enabling different functions units in microprocessor instruction decoding
- Telephone network
- Data distribution
- Control unit of Central Processing unit (CPU)
- Robotic vehicles
- Automation system
- Make full adder
- Recording transmission