Parameters |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
24-SOIC (0.295, 7.50mm Width) |
Number of Pins |
24 |
Weight |
624.398247mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Series |
74CBTD |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
24 |
Type |
Bus Switch |
Resistance |
7Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Bus Driver/Transceivers |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
74CBTD3861 |
Pin Count |
24 |
Operating Supply Voltage |
5V |
Circuit |
10 x 1:1 |
Power Supplies |
5V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Nominal Supply Current |
1.5mA |
Output Current |
64mA |
Number of Bits |
10 |
Propagation Delay |
350 ps |
Quiescent Current |
1.5mA |
Turn On Delay Time |
350 ps |
Family |
CBT/FST/QS/5C/B |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
20MHz |
Output Polarity |
TRUE |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Power Supply Current-Max (ICC) |
0.003mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
1 |
Count Direction |
BIDIRECTIONAL |
Height |
2.65mm |
Length |
15.4mm |
Width |
7.5mm |
Thickness |
2.35mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
SN74CBTD3861DWG4 Overview
In order to conserve board space, digital switch is included in the 24-SOIC (0.295, 7.50mm Width).The package is packaged in the manner of Tube.digital switch ic uses the method of Surface Mount for mounting.For the analog part of the multiplexers, an IC Bus Switch is used.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.Using a 4.5V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.As a member of 74CBTD series, the multiplexers can be used for a wide range of applications.There are 24 terminations included in its basic configuration.To find signal switch's related components, a base part number of 74CBTD3861 may also be used.In this case, 5V is the voltage supplied to the multiplexer's system.There are 24 component pins in this turn signal switch.At the end of a conductor, it uses GULL WING as the point where the conductor ends.The supply type of this multiplexer ic is Single.The board has 24 pins configured.This unit is mounted in the way of Surface Mount.The logic switch object belongs to the family of CBT/FST/QS/5C/B.Signal multiplexer contains 10 bits.For mux switch's normal operation, there is a power supply provided at 5V.The part belongs to the Bus Driver/Transceivers category of signal switches.Despite not interacting with external factors, it consumes 1.5mA current of multiplexer ic.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.A resistance of 2 is used to operate the signal switching.The resistance of the signal switching is 7Ohm.Higher switches' flexibility is provided by providing 64mA as the output current.
SN74CBTD3861DWG4 Features
Supplied in the 24-SOIC (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBTD3861DWG4 Applications
There are a lot of Texas Instruments SN74CBTD3861DWG4 Signal Switches / Multiplexers / Decoders applications.
- Code conversion
- VGA
- Code converters
- Automatic Monitoring systems
- Automatic health monitoring systems
- Data-routing applications
- To select different devices in microprocessor input
- Steel plants
- D/A converters
- Speed synchronization of multiple motors in industries