SN74CBTD3861PW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Weight | 89.499445mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74CBTD |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | Bus Switch |
| Resistance | 7Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74CBTD3861 |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Circuit | 10 x 1:1 |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Max Supply Current | 3μA |
| Number of Bits | 10 |
| Propagation Delay | 10 ns |
| Quiescent Current | 1.5mA |
| Turn On Delay Time | 10 ns |
| Family | CBT/FST/QS/5C/B |
| Number of Inputs | 10 |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 20MHz |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Power Supply Current-Max (ICC) | 0.003mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Count Direction | BIDIRECTIONAL |
| Drain to Source Resistance | 5Ohm |
| Height | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBTD3861PW Overview
For the purpose of saving board space, digital switch is included in the 24-TSSOP (0.173, 4.40mm Width).The package is packaged in the manner of Tube.For mounting, digital switch ic uses the method Surface Mount.Bus Switch is the analog IC that the multiplexers uses.When the operating temperature is kept at -40°C~85°C, the machine will not be sensturn signal switchive to external influences.Designers have greater flexibility using digital controlled switch when it works with 4.5V~5.5V voltage.Multiplexers of the 74CBTD series can be used in a wide range of applications.There is a design for terminating 24 as part of its basic configuration.In addition, it also has a base part number of 74CBTD3861, which can be used to find related parts.In this case, 5V is the voltage supplied to the multiplexer's system.This turn signal switch contains 24 component pins.As a result, conductors end at GULL WING.Its supply type is Single, which is used as the source of power.The board has 24 pins configured.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is a member of the CBT/FST/QS/5C/B family.Signal multiplexer provides 10 bits.mux switch's normal operation requires the power supply of 5V.The digital switch ic is a part of an electronic system classified as Bus Driver/Transceivers.Despite not interacting with external factors, it consumes 1.5mA current of multiplexer ic.When a supply voltage of 5V is used, reliable performance of the multiplexers can be achieved.This multiplexer has a total of 10 inputs.The resistance of the signal switching is 2.It operates with a resistance of 7Ohm.64mA provides a high degree of switches' flexibility.
SN74CBTD3861PW Features
Supplied in the 24-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBTD3861PW Applications
There are a lot of Texas Instruments SN74CBTD3861PW Signal Switches / Multiplexers / Decoders applications.
- Communication system
- Metal detectors
- Data transfer
- Relay
- Enabling different functions units in microprocessor instruction decoding
- Memory system of computers
- Data collection system
- Analog to digital conversion
- Data bus control
- Image transmission
