SN74CBTD3861PWE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Weight | 89.499445mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74CBTD |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | Bus Switch |
| Resistance | 7Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74CBTD3861 |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Circuit | 10 x 1:1 |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 1.5mA |
| Output Current | 64mA |
| Number of Bits | 10 |
| Propagation Delay | 350 ps |
| Quiescent Current | 1.5mA |
| Turn On Delay Time | 10 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 20MHz |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Power Supply Current-Max (ICC) | 0.003mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Count Direction | BIDIRECTIONAL |
| Height | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74CBTD3861PWE4 Overview
Providing this information in the 24-TSSOP (0.173, 4.40mm Width) enables digital switch board space to be saved.Tube represents its packaging.The mounting method digital switch ic uses is Surface Mount.the multiplexers uses an analog IC Bus Switch.The operating temperature of -40°C~85°C will not be susceptible to external factors.Design engineers have more flexibility when digital controlled switch operates at 4.5V~5.5V voltage.Multiplexers in the 74CBTD series are suitable for a wide range of applications.There is a design for terminating 24 as part of its basic configuration.The base part number is 74CBTD3861, which can also be used to find its logic switch related parts.The multiplexer's system is powered by 5V voltage.Currently, this turn signal switch has a total of 24 component pins.A conductor terminates at GULL WING.Single is used as its supply type.A total of 24 pins are configured on this board.This unit is mounted in the way of Surface Mount.Among the family of CBT/FST/QS/5C/B the logic switch is a member.Signal multiplexer contains 10 bits.For mux switch's normal operation, there is a power supply provided at 5V.This is an the digital switch ic that is classified as Bus Driver/Transceivers.It consumes 1.5mA current of multiplexer ic without external influences.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.A resistance of 2 governs its operation.It operates with a resistance of 7Ohm.64mA provides a high degree of switches' flexibility.
SN74CBTD3861PWE4 Features
Supplied in the 24-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBTD3861PWE4 Applications
There are a lot of Texas Instruments SN74CBTD3861PWE4 Signal Switches / Multiplexers / Decoders applications.
- Implementing boolean functions with multiple variables
- PCIe
- Telephone network
- Small scale TV wall
- D/A converters
- Idle motor
- Frequency multiplexing system
- Code conversion
- Code converters
- Data communication
