SN74CBTD3861PWG4
| Parameters | |
|---|---|
| Output Current | 64mA |
| Number of Bits | 10 |
| Propagation Delay | 350 ps |
| Quiescent Current | 1.5mA |
| Turn On Delay Time | 10 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Bandwidth | 20MHz |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Power Supply Current-Max (ICC) | 0.003mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Count Direction | BIDIRECTIONAL |
| Height | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Weight | 89.499445mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74CBTD |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | Bus Switch |
| Resistance | 7Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74CBTD3861 |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Circuit | 10 x 1:1 |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 1.5mA |
SN74CBTD3861PWG4 Overview
Digital switch is provided in the 24-TSSOP (0.173, 4.40mm Width) for the purpose of saving board space.The package is packaged in the manner of Tube.The method digital switch ic adopts for mounting is Surface Mount.the multiplexers uses IC Bus Switch as the analog IC.The operating temperature of -40°C~85°C will not be susceptible to external factors.With a supply voltage of 4.5V~5.5V, designers have greater flexibility of digital controlled switch.Multiplexers of the 74CBTD series can be used in a wide range of applications.The basic configuration of this system includes 24 terminations.In addition, it also has a base part number of 74CBTD3861, which can be used to find related parts.For multiplexer's system, a voltage of 5V is supplied.This turn signal switch has a total of 24 component pins.It employs GULL WING as the point at which conductors come to an end.In this case, the supply type is Single.This multiplexer ic is configured with 24 pins.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is included into the family of CBT/FST/QS/5C/B.In this signal multiplexer, there are 10 bits provided.It is provided that 5V has a power supply in order to function normally.The part belongs to the Bus Driver/Transceivers category of signal switches.In the absence of external influences, it consumes 1.5mA current of multiplexer ic.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.A resistance of 2 governs its operation.A resistance of 7Ohm is used to operate the signal switching.For greater switches' flexibility, the output current of 64mA is provided.
SN74CBTD3861PWG4 Features
Supplied in the 24-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBTD3861PWG4 Applications
There are a lot of Texas Instruments SN74CBTD3861PWG4 Signal Switches / Multiplexers / Decoders applications.
- A/D converters
- Code conversion
- Memory system of computers
- Enabling different rows of memory depending on address in memory chips
- Metal detectors
- CNC machines
- Idle motor
- Analog, digital or video signal switching
- Microprocessor input/output systems
- Data demultiplexing
