Parameters |
Count Direction |
BIDIRECTIONAL |
Height |
1.2mm |
Length |
7.8mm |
Width |
4.4mm |
Thickness |
1mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
24-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
24 |
Weight |
89.499445mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74CBTD |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
24 |
ECCN Code |
EAR99 |
Type |
Bus Switch |
Resistance |
7Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Bus Driver/Transceivers |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Base Part Number |
74CBTD3861 |
Pin Count |
24 |
Operating Supply Voltage |
5V |
Circuit |
10 x 1:1 |
Power Supplies |
5V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Nominal Supply Current |
1.5mA |
Output Current |
64mA |
Number of Bits |
10 |
Propagation Delay |
350 ps |
Quiescent Current |
1.5mA |
Turn On Delay Time |
10 ns |
Family |
CBT/FST/QS/5C/B |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
20MHz |
Output Polarity |
TRUE |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Power Supply Current-Max (ICC) |
0.003mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
1 |
SN74CBTD3861PWRE4 Overview
It is included in the 24-TSSOP (0.173, 4.40mm Width) in order to save board space.The package is packaged in accordance with Tape & Reel (TR).The method digital switch ic adopts for mounting is Surface Mount.A digital IC Bus Switch is used as the analog component of the multiplexers.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.When digital controlled switch operates at 4.5V~5.5V, designers have superior flexibility.Multiplexers in the 74CBTD series are suitable for a wide range of applications.Among its basic configurations are 24 terminations.The base part number is 74CBTD3861, so you can find its logic switch related parts using that number.The multiplexer's system is supplied with a voltage of 5V.This turn signal switch consists of 24 component pins.Conductors terminate at GULL WING in this design.Single is used as its supply type.Currently, it is configured with 24 pins.It is mounted in the way of Surface Mount.The logic switch is a member of the CBT/FST/QS/5C/B family.Signal multiplexer provides 10 bits.During mux switch's normal operation, 5V is provided with a power supply.Bus Driver/Transceivers is a category for the digital switch ics.Without the influence of external factors, it consumes 1.5mA current of multiplexer ic.Using a supply voltage of 5V can result in reliable performance of the multiplexers.The signal switching is packaged by TR. This signal switching operates at a resistance of 2.The system operates with a resistance of 7Ohm.Higher switches' flexibility is provided by providing 64mA as the output current.
SN74CBTD3861PWRE4 Features
Supplied in the 24-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBTD3861PWRE4 Applications
There are a lot of Texas Instruments SN74CBTD3861PWRE4 Signal Switches / Multiplexers / Decoders applications.
- Data bus control
- Make full adder
- Data collection system
- Relay
- Memory system of computers
- Small scale TV wall
- Idle motor
- Medium scale TV wall
- High-performance memory-decoding applications
- Encrypted communications system