SN74CBTK16245DGGR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74CBTK |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Type | Bus Switch |
| Resistance | 20Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74CBTK16245 |
| Pin Count | 48 |
| Operating Supply Voltage | 5V |
| Circuit | 8 x 1:1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Nominal Supply Current | 250mA |
| Output Current | 64mA |
| Number of Bits | 16 |
| Throw Configuration | SPST |
| Propagation Delay | 250 ps |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| High Level Output Current | 64mA |
| Low Level Output Current | 15mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Width | 6.1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74CBTK16245DGGR Overview
As a means of saving space, digital switch is provided in the 48-TFSOP (0.240, 6.10mm Width).The package is in the form of Cut Tape (CT).As far as mounting is concerned, digital switch ic uses Surface Mount.For the analog part of the multiplexers, an IC Bus Switch is used.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.When operated with a 4.5V~5.5V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.Since they are members of the 74CBTK series, they can be used in a wide variety of applications.Its basic configuration includes terminations in the 48 range.In addition, it also has a base part number of 74CBTK16245, which can be used to find related parts.In this case, 5V is the voltage supplied to the multiplexer's system.In this turn signal switch, there are 48 components that can be connected to each pin.As the end of conductors, it uses GULL WING.As a type of supply, Single is employed.A total of 48 pins are configured on this board.It is mounted in the way of Surface Mount.The logic switch is a member of the CBT/FST/QS/5C/B family.The multiplexer ic provides 16 bits.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 4V.The power supply of 5V is provided for mux switch's normal operation.In electronic terms, the digital switch ic is classified as Bus Driver/Transceivers.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.This signal switching operates at a resistance of 2.The system operates with a resistance of 20Ohm.It is possible to provide a current output of 64mA for greater switches' flexibility.
SN74CBTK16245DGGR Features
Supplied in the 48-TFSOP (0.240, 6.10mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBTK16245DGGR Applications
There are a lot of Texas Instruments SN74CBTK16245DGGR Signal Switches / Multiplexers / Decoders applications.
- Microprocessor instruction decoding
- Code converters
- Medical industry
- Analog to digital conversion
- Signal router
- HDMI applications
- Make full adder
- A/D converters
- PCIe
- Night vision cameras
