SN74CBTK16245DGVR
| Parameters | |
|---|---|
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74CBTK |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Type | Bus Switch |
| Resistance | 14Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Base Part Number | 74CBTK16245 |
| Pin Count | 48 |
| Operating Supply Voltage | 5V |
| Circuit | 8 x 1:1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Nominal Supply Current | 250mA |
| Output Current | 64mA |
| Number of Bits | 16 |
| Throw Configuration | SPST |
| Propagation Delay | 250 ps |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| High Level Output Current | 64mA |
| Low Level Output Current | 15mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Length | 9.7mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
SN74CBTK16245DGVR Overview
Due to the fact that it is provided in the 48-TFSOP (0.173, 4.40mm Width), digital switch allows the board to be compacted.Cut Tape (CT) is the method used for packaging.Digital switch ic adheres to a mounting method of Surface Mount.As the analog part, the circuit uses an analog IC Bus Switch.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.When operated with a 4.5V~5.5V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.The multiplexers can be used for a wide range of applications since they are members of 74CBTK series.This configuration includes 48 terminations as part of its basic functionality.The base part number is 74CBTK16245, which is also useful when looking up signal switch's related components.The multiplexer is supplied with 5V voltage.Currently, this turn signal switch has a total of 48 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.There is a type of supply of Single.A total of 48 pins are configured on this board.It is mounted in the way of Surface Mount.The logic switch is a member of the CBT/FST/QS/5C/B family.Signal multiplexer provides 16 bits.Keeping Vsup at 4V will prevent some unwanted failures.A power supply is provided for mux switch's normal operation of 5V.Bus Driver/Transceivers is the classification for this the digital switch ic.Providing a supply voltage of 5V can provide reliable performance of the multiplexers.A resistance of 2 is used to operate the signal switching.This signal switching operates at a resistance of 14Ohm.There is an output current of 64mA that allows for greater switches' flexibility.
SN74CBTK16245DGVR Features
Supplied in the 48-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBTK16245DGVR Applications
There are a lot of Texas Instruments SN74CBTK16245DGVR Signal Switches / Multiplexers / Decoders applications.
- Metal detectors
- Data transfer
- Paper plants
- Microprocessor input/output systems
- Data-routing applications
- CNC machines
- HDMI applications
- Transmission from the computer system of a satellite
- Speed control of medern motors
- Signal router
