SN74CBTK16245DLR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74CBTK |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Type | Bus Switch |
| Resistance | 14Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Base Part Number | 74CBTK16245 |
| Pin Count | 48 |
| Operating Supply Voltage | 5V |
| Circuit | 8 x 1:1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Nominal Supply Current | 250mA |
| Output Current | 64mA |
| Number of Bits | 16 |
| Throw Configuration | SPST |
| Propagation Delay | 250 ps |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| High Level Output Current | 64mA |
| Low Level Output Current | 15mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 2 |
| Length | 15.875mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74CBTK16245DLR Overview
It is included in the 48-BSSOP (0.295, 7.50mm Width) in order to save board space.It is packaged in the way of Cut Tape (CT).Digital switch ic uses a Surface Mount mounting method.Bus Switch is the analog IC that the multiplexers uses.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.The turn signal switch is designed for use with a 4.5V~5.5V supply voltage, which gives it a lot of flexibility.Multiplexers of the 74CBTK series can be used in a wide range of applications.As part of its basic configuration, 48 terminations are designed as a part of it.The base part number is 74CBTK16245, so you can find its logic switch related parts using that number.The multiplexer's system works with 5V voltage.In this turn signal switch, there are 48 components that can be connected to each pin.As the end of conductors, it uses GULL WING.The supply type of this multiplexer ic is Single.With 48 pins, it is configured.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is a member of the family of CBT/FST/QS/5C/B.There are 16 bits signal multiplexer provides.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 4V.In order to maintain mux switch's normal operation, power is provided to 5V.The digital switch ic is a part of an electronic system classified as Bus Driver/Transceivers.When a supply voltage of 5V is used, reliable performance of the multiplexers can be achieved.The system operates with a resistance of 2.As far as the resistance is concerned, it operates with 14Ohm.For increased switches' flexibility, the output current of 64mA is provided.
SN74CBTK16245DLR Features
Supplied in the 48-BSSOP (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBTK16245DLR Applications
There are a lot of Texas Instruments SN74CBTK16245DLR Signal Switches / Multiplexers / Decoders applications.
- To select different devices in microprocessor output
- Injectors
- Logic circuits
- Make full adder
- Microprocessor memory systems
- Data collection system
- Relay
- Textile mills
- GLAN
- Microprocessor instruction decoding
