SN74CBTK32245GKER
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 96-LFBGA |
| Number of Pins | 96 |
| Weight | 174.20782mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74CBTK |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 96 |
| Type | Bus Switch |
| Resistance | 9Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Bus Driver/Transceivers |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74CBTK32245 |
| Pin Count | 96 |
| Qualification Status | Not Qualified |
| Circuit | 8 x 1:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Nominal Supply Current | 2mA |
| Number of Bits | 32 |
| Throw Configuration | SPST |
| Propagation Delay | 250 ps |
| Turn On Delay Time | 7 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Turn-Off Delay Time | 7 ns |
| High Level Output Current | 64mA |
| Low Level Output Current | 15mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 4 |
| Length | 13.5mm |
| Width | 5.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74CBTK32245GKER Overview
For the purpose of saving board space, digital switch is included in the 96-LFBGA.Tape & Reel (TR) is the packaging method.For mounting, digital switch ic uses the method Surface Mount.Bus Switch is the analog IC that the multiplexers uses.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.The turn signal switch is designed for use with a 4.5V~5.5V supply voltage, which gives it a lot of flexibility.These multiplexers are members of the 74CBTK series, which provide extensive application potential.Among its basic features are 96 terminations.The base part number is 74CBTK32245, which can also be used to find its logic switch related parts.The multiplexer's system works with 5V voltage.This turn signal switch consists of 96 component pins.As a result, conductors end at BALL.Single is employed as its supply type.The board has 96 pins configured.It is mounted in the way of Surface Mount.There is a family of CBT/FST/QS/5C/B members.In the signal multiplexer, there are 32 bits available.Keep Vsup at 4V to avoid unnecessary failures.To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 5.5V.A power supply is provided for mux switch's normal operation of 5V.This is a signal switch that is categorized as Bus Driver/Transceivers.The signal switching operates with a resistance of 2.A resistance of 9Ohm is used to operate it.
SN74CBTK32245GKER Features
Supplied in the 96-LFBGA package
Adopting a supply type of Single
Power supplies of 5V
SN74CBTK32245GKER Applications
There are a lot of Texas Instruments SN74CBTK32245GKER Signal Switches / Multiplexers / Decoders applications.
- Transmission from the computer system of a satellite
- Analog to digital conversion
- To select different task for memory in microprocessor memory systems
- Microprocessor instruction decoding
- Microprocessor input/output systems
- Data collection system
- VGA
- To select different devices in microprocessor output
- Decimal decoder
- LVDS
