Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
24-SSOP (0.154, 3.90mm Width) |
Number of Pins |
24 |
Weight |
129.500622mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74CBTK |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
24 |
ECCN Code |
EAR99 |
Type |
Bus Switch |
Resistance |
20Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Bus Driver/Transceivers |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.64mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
74CBTK6800 |
Pin Count |
24 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
5V |
Circuit |
10 x 1:1 |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4V |
Number of Ports |
2 |
Nominal Supply Current |
20μA |
Number of Bits |
10 |
Throw Configuration |
SPST |
Propagation Delay |
250 ps |
Family |
CBT/FST/QS/5C/B |
Output Characteristics |
3-STATE |
Supply Type |
Single |
Bandwidth |
200MHz |
Prop. Delay@Nom-Sup |
0.25 ns |
High Level Output Current |
64mA |
Low Level Output Current |
15mA |
Voltage Supply Source |
Single Supply |
Independent Circuits |
1 |
Count Direction |
BIDIRECTIONAL |
Translation |
N/A |
Height |
1.75mm |
Length |
8.65mm |
Width |
3.9mm |
Thickness |
1.5mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74CBTK6800DBQR Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 24-SSOP (0.154, 3.90mm Width).As a result, it is packaged in the way of Tape & Reel (TR).In terms of mounting, digital switch ic uses the Surface Mount method .The multiplexers uses an analog IC Bus Switch as the analog part of the circuit.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.Using a 4.5V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.Multiplexers of the 74CBTK series can be used in a wide range of applications.There are 24 terminations included in its basic configuration.The part number for 74CBTK6800 can be used to find its logic switch related parts as well.In multiplexer's system, 5V is the voltage supplied.In this turn signal switch, there are 24 component pins.Conductors terminate at GULL WING in this design.There is a type of supply of Single.This multiplexer ic has 24 pins configured.It is mounted in the way of Surface Mount.The logic switch is a member of the CBT/FST/QS/5C/B family.Signal multiplexer provides 10 bits.Avoid unnecessary failures by keeping the supply voltage (Vsup) at 4V.In order for 5V to operate normally, a power supply is provided.This is a signal switch that is categorized as Bus Driver/Transceivers.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 5V.The switches package is packaged in accordance with the TR method.A resistance of 2 governs its operation.The system operates with a resistance of 20Ohm.
SN74CBTK6800DBQR Features
Supplied in the 24-SSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBTK6800DBQR Applications
There are a lot of Texas Instruments SN74CBTK6800DBQR Signal Switches / Multiplexers / Decoders applications.
- Automation system
- Idle motor
- LVDS
- Home automation system
- Microprocessor instruction decoding
- Medium scale TV wall
- Recording transmission
- Robotic vehicles
- Textile mills
- Audio transmission